EJOT® facade anchor SDF-KB-10V/M8

Applications :
Embedment of support profiles with steel rods for rainscreen applications Embedment of suspended ceilings Fastening of threaded sleeves Note   Please note the European Technical Approval ETA-10/0305 in your planning and in the processing of the products. Further information about parameters and loads can be found in the approval under the tab "Downloads".          

Properties :
Anchor with minimal embedment depth in concrete Very short expansion part, for short installation times Optimal expanding part due to radial expansion Very high bending moment Product identification through different sleeve colours Double safety lock against torsion for secure installation        

Technical specifications :
Characteristic values Hole depth in concrete h1,1: ≥ 70 mm Hole depth in concrete h1,1: ≥ 40 mm Hole depth in concrete h1,2: ≥ 70 mm Effective embedment depth in masonry hnom,2: ≥ 50 mm Drill-hole diameter d0: 10 mm Drive: A/F13 Length M8 threaded connection: 13 mm Characteristic loads Tensile load NRk,p in concrete C12/15    Temperature range 30 °C / 50 °C: 4.50 kN    Temperature range 50 °C / 80 °C: 4.00 kN FRk Brick Mz 20-1.8, NF: 2.50 kN FRk Solid lime sand brick KS 36, NF: 4.00 kN FRk Solid lime sand brick KS 20, 8 DF: 4,50 kN Transverse load VRk,s in concrete C12/15 at hnom,1 = 40 mm    Anchor with stainless steel screw A4: 9.12 kN Transverse load VRk,s at hnom,2 = 50 mm    Anchor with stainless steel screw A4: 12.94 kN Bending moment MRk,s at hnom,1 =40 mm    Anchor with stainless steel screw A4: 16.09 kN Side load MRk,s at hnom,2 = 50 mm    Anchor with stainless steel screw A4: 26.62 Nm        

More information on : www.ejot.de

SDF-KB-10Vx60/M8x13-E
SKU: 8581060813