Samobušeći vijci

Anwendungen :
Verschraubung von Schienensystemen mit Zwischendämmung auf dünnwandige Stahl-, Aluminium- oder Holzunterkonstruktionen Verschraubung von Holzbauteilen auf dünnwandige Stahl- oder Aluminiumunterkonstruktionen        

Eigenschaften :
Edelstahl A2 mit gehärteter Stahl-Bohrspitze        

Technische Daten :
Bohrkapazität tI + tII: 1,0 + 1,0 mm Antrieb: Innensechsrund TORX® T25 Einschraubdrehzahl: max. 1500 1/min        

Weitere Informationen unter: www.ejot.de

Anwendungen :
Spezialschraube zur Befestigung von Holz auf Metallkonstruktionen Verarbeitungshinweis Um sicherzustellen, dass die Flügel abscheren, muss die Materialstärke der Metallunterkonstruktion mindestens 2,0 mm betragen.        

Eigenschaften :
Edelstahl A2 mit gehärteter Stahl-Bohrspitze Die angebrachten Flügel reiben das Holz größer auf, als der Gewindedurchmesser ist Durch die Flügel wird ein Zwangsvorschub der Schraube und somit eine mögliche Beschädigung der Bohrspitze vermieden            

Technische Daten :
Bohrkapazität tII: 6,0 mm Antrieb: Innensechsrund T25 Einschraubdrehzahl: max. 1300 1/min        

Weitere Informationen unter: www.ejot.de

Applications :
Fixing standing seam systems (clips) to 0.55–1.50 mm steel substructure Fixing standing seam systems (clips) to 0.8–1.5 mm aluminium substructure or timber substructure Embedment depth acc. to the approval 18–24 mm        

Properties :
A2 stainless steel with hardened drill point Under-head serrations to increase the installation reliability Special thread for thin-walled components High stripping torque Installation without special tools        

Technical specifications :
Drilling capacity tI + tII: 1.00 + 1.00 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening profiled steel and aluminium sheets and sandwich panels to 4-10 mm steel substructure Fastening aluminium profiled sheets to 4-12 mm aluminium substructures        

Properties :
A4 stainless steel with hardened steel drill point Stainless steel sealing washer Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII: 2.0 + 10.0 mm Drive: Hexagon A/F8 Installation rotation speed: max. 1300 rpm        

More information on : www.ejot.de

Anwendungen :
Zur Ausbildung von Gleit- und Festpunkten bei Unterkonstruktionen in der VHF Zur Verbindung von vorgelochten Edelstahl oder Aluminiumwandhaltern auf Aluminiumtragprofilen        

Eigenschaften :
Edelstahl A4 mit gehärteter Stahl-Bohrspitze Gleitscheibe mit Pufferzone zwischen Schraubenkopf verhindert zu starke Vorspannkraft der Verbindung Gleitscheibe unverlierbar vormontiert          

Technische Daten :
Bohrkapazität: 3,0 mm Antrieb: Sechskant SW8        

Weitere Informationen unter: www.ejot.de

Applications :
Side lap stitching of profiled steel and aluminium sheet Fastening profiled steel and aluminium sheet to cassette system walls        

Properties :
A4 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under the screw head for side lap stitching        

Technical specifications :
Drilling capacity tI + tII: 1.5 + 2.0 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
For increased loads For reliable replacement of stripped fitting screws

Properties :
With DSK point for precise and no run-out fastening in PVC With HT thread - Head diameter identical with fitting screw type S (7,3 mm) Case-hardened steel

Technical specifications :
Head diameter: 7.3 mm Drive: cross recess PH 2 Thread type: HT thread

More information on : www.ejot.de

Applications :
Especially suited for fixing: tilt and turn fittings in regular and thin-walled PVC profiles and for automated fastening Also suited for fixing: locking plates, strips and bearings for reinforcing steel rods with pre-drilling (as specified)

Properties :
the classic screw for fittings, technically leading the way for no-compromises in quality for high installation safety even in thin-walled profiles with double-start thread and lean thread pitch for optimum stripping torques and pull-out values in PVC A2 stainless steel for high corrosion resistance

Technical specifications :
Head diameter: 7.3 mm Drive: Phillips PH 2 Thread type: double-start thread

More information on : www.ejot.de

Applications :
Fixing gear rack and baffle gear For narrow casement profiles

Properties :
The threadless area minimises: The friction at the joint of gear rack / baffle gear Permanent, easy opening and closing of the window is ensured Under-head serrations for increased safety against stripping Case-hardened steel

Technical specifications :
Head Diameter: 7.1 mm Drive: cross recess PH 2 Thread type: single-start screw thread

More information on : www.ejot.de

Applications :
Manual assembly of tilt and turn fittings with low rotation speed Fixing locking plates, strips and bearings in steel reinforcement with pre-drilling

Properties :
With double cutting edge and symmetrically arranged cutting surfaces Excellent alignment for precise and no runout fastening in PVC Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.3 mm Drive: cross recess PH 2 Thread type: double-start thread

More information on : www.ejot.de

Applications :
Fastening of tilt and turn fittings in regular and thin-walled PVC profiles and in steel or GRP inserts Fixing locking plates, strips and bearings

Properties :
Classic screw for fittings, technically leading, with double-start thread The optimum also in thin-walled profiles Optimum stripping torques and pull-out values in PVC Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.3 mm Drive: cross recess PH 2 Thread type: double-start thread

More information on : www.ejot.de

Applications :
Fixing gear rack and baffle gear

Properties :
The threadless area minimises: The friction at the joint of gear rack / baffle gear Permanent, easy opening and closing of the window is ensured Case-hardened steel

Technical specifications :
Head diameter: 7.3 mm Drive: cross recess PH 2 Thread type: double-start thread

More information on : www.ejot.de

Applications :
Fastening of tilt and turn fittings in PVC profiles and in steel or GRP inserts Fixing locking plates, strips and bearings

Properties :
Cost-effective screw for fittings with onestart thread Under-head serrations for increased safety against stripping Slightly curved head for flawless appearance even with bevelled installation Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head Diameter: 7.1 mm Drive: cross recess PH 2 Thread type: single-start screw thread

More information on : www.ejot.de

Applications :
For fixing tilt and turn fittings in wood Fixing locking plates and bearings etc.

Properties :
The special thread geometry and the wax coating ensure low installation torques and high stripping or loosening torques Immediate grip in the wood due to a perfectly formed cutting tip Edge distance and pre-drilling according to Eurocode 5 (former DIN 1052) Case-hardened steel

Technical specifications :
Head diameter: 7.0 mm Thread geometry: special thread, reinforced Point: cutting point

More information on : www.ejot.de