Termoizolacioni elementi

Applications :
EJOT Iso-Spiral anchor for fastening of attachments Fastening solution for light attachments on ETICS facades        

Properties :
Recommended load: max. 5 kg per mounting point No thermal bridging Can be installed with commercial drill / drive tool        

Technical specifications :
Retrofit installation through the finish render possible: simply screw through the final rendering into the insulation (drive TORX T40, usually without pre-drilling), fasten a 4-5 mm screw and fix the attachment        

More information on : www.ejot.de

Applications :
EJOT Cylinder is an assembly cylinder made of foam molded EPS with wave-shaped lateral surface and high mass density.

Properties :
Thanks to the elasticity of the rigid foam, the EJOT cylinder is particularly suitable for thermal bridge-free subcontracted assembly in ETIC systems made of expanded polystyrene (EPS). Timber or sheet metal screws are suitable for the screw connection as well as such with cylindrical thread and large pitch (frame screws).  

Technical specifications :
Grâce aux qualités de solidité et d'élasticité de la mousse, le cylindre EJOT est particulièrement adapté pour les montages tiers sans ponts thermiques dans les systèmes d'isolation thermique extérieure en polystyrène expansé (PSE). Les vis qui conviennent pour le vissage sont les vis à bois et à tôle ainsi que celles avec un filetage cylindrique et un grand pas (vis pour cadres).   Les montages tiers sans ponts thermiques sont possibles, par ex. pour les : colliers de tuyaux mécanismes de blocage et tourniquets porte-cintres caissons de store butées d'arrêt pour volets etc.

More information on : www.ejot.de

Applications :
EJOT Disc is a fixation annular blank made of high quality plastic (PE). The inner side has a nub structure, the outer surface is perforated.

Properties :
EJOT Dics is particularly suitable for thermal bridge-free subcontracted assembly in external thermal insulation composite systems made of expanded polystyrene (EPS).   Commercially available timber or sheet metal screws (Ø 4-5 mm) are suitable for the screw connection in the fixation annular blank.   The EJOT Disc is particularly suitable for the fastening of light mounting parts, e.g., for   Storen guide rails Light signs Temperature sensors Pipe brackets Trap and casement fastener Billboards

Technical specifications :
No penetration of water with openings Easy installation No thermal bridges

More information on : www.ejot.de

Applications :
The EJOT Iso-Dart is a constructive fastening system comprising one installation bush made of plastic including sealing washer and one facade anchor (Ø 8 mm).    EJOT Iso-Dart comprising: 1 installation bush 1 sealing washer 1 EJOT facade anchor        

Properties :
EJOT Iso-Dart for retrofitting light to medium heavy mounted parts to ETICS facades made of EPS, mineral wool and mineral foam. With the EJOT Iso-Dart add-on parts can be mounted by taking up common coarse thread screws Ø 9 mm or hanger bolts Ø 9 mm with neck thread M10, e.g.: Downpipe brackets Signs and billboards Folding shutter locking mechanism Lamps etc.        

Technical specifications :
High load-bearing capacity by anchoring to the substrate Reduces the thermal transmission by thermal decoupling (Chi value 0,002 W/K acc. to TR025) Waterproofing against the plaster shell with high-quality EPDM seal Inspection of the resistance to driving rain in accordance with DIN EN 12155 Easy and quick installation        

More information on : www.ejot.de

Applications :
The EJOT Power-Bloc is foam-molded cuboid made of EPS with high mass density. The surrounding 20 mm grid specifies the precise saw cut.  

Properties :
El EJOT Power-Block es un ortoedro fabricado en EPS de alta densidad moldeado en espuma. Las marcas que hay cada 20 mm en el contorno indican las dimensiones exactas para el corte con sierra.   Dimensiones Dimensiones: 160 x 100 mm Superficie útil: 140 x 80 mm Longitud: 1000 mm Densidad: 140 kg/m³

Technical specifications :
Timber or sheet metal screws are suitable for the screw connection in the EJOT Power-Bloc as well as such with cylindrical thread and large pitch (frame screws).  

More information on : www.ejot.de

Applications :
The EJOT SLK-Set F is a heavy-duty console, with general building authorities approval, comprising black coloured, rot-proof and CFC-free PU rigid foam plastics (polyurethane) with four foamed steel consoles for the friction-locked bolting with the substrate, on an aluminium plate for the bolting of the assembly object as well as a compact plate (HPL), which guarantees an optimum pressure distribution on the surface. Tension rods made from fibre-reinforced plastic (polyamide) guarantee the necessary stability. Fastening in wall materials via chemical anchors. Dimensions Base: 250 x 150 mm Thicknesses D: 100 - 300 mm Compact sheet: 182 x 140 x 10 mm Effective area: 162x82 mm Thickness of aluminium plate: 15 mm Hole spacing: 224 x 112 mm Mass density PU: 350 kg/m3 EJOT SLK-Set C for fastening in concrete Injection mortar: EJOT mortar cartridge CA-V 300 Anchor rods: M 10 x 170 zinc-plated (incl. washer and nut) Drill hole diameter concrete: 12 mm Drilling depth in the substrate: 75 mm Embedment depth: 70 mm

Properties :
The EJOT SLK-Set is suitable for the thermal bridge-reduced subcontracted assembly in ETIC systems.  

Technical specifications :
cantilevers awnings porches  

More information on : www.ejot.de

Applications :
The EJOT SLK-Set F is a heavy-duty console, with general building authorities approval, comprising black coloured, rot-proof and CFC-free PU rigid foam plastics (polyurethane) with four foamed steel consoles for the friction-locked bolting with the substrate, on an aluminium plate for the bolting of the assembly object as well as a compact plate (HPL), which guarantees an optimum pressure distribution on the surface. Tension rods made from fibre-reinforced plastic (polyamide) guarantee the necessary stability. Fastening in wall materials via chemical anchors. Dimensions Base: 250 x 150 mm Thicknesses D: 100 - 300 mm Compact sheet: 182 x   140 x 10 mm Effective area: 162x82 mm Thickness of aluminium plate: 15 mm Hole spacing: 224 x 112 mm Mass density PU: 350 kg/m3 EJOT SLK-Set C for fastening in concrete Injection mortar: EJOT mortar cartridge CA-P 300 Anchor rods: M 10 x 170 zinc-plated (incl. washer and nut) Drill hole diameter solid brick: 12 mm Drill hole diameter hollow brick: 16 mm Drilling depth in the substrate: 90 mm Embedment depth: 85 mm

Properties :
The EJOT SLK-Set is suitable for the thermal bridge-reduced subcontracted assembly in ETIC systems.  

Technical specifications :
cantilevers awnings porches  

More information on : www.ejot.de

Applications :
The EJOT Trawik-Set F (assembly area parallel to the facade) comprises black coloured, rot-proof and CFC-free PU rigid foam plastics (polyurethane) with a foamed steel plate for the friction-locked bolting with the substrate, on an aluminium plate for the bolting of the assembly object as well as a compact plate (HPL), which guarantees an optimum pressure distribution on the surface.  

Properties :
EJOT Trawik-Set F-C for the mechanical fastening in concrete Anchor: EJOT SDF-KB 10 V x 100 Drilling diameter: 10 mm min. drilling depth: 60 mm min. embedment depth: 50 mm Tool fitting: A/F13 / T40

Technical specifications :
EJOT Trawik-Set F is suitable for the thermal bridge reduced subcontracted assembly in external thermal insulation composite systems. EJOT Trawik-Set F has a limited UV resistance and does not need any protective coverings during the construction time, but when installed, it must be protected against weather conditions and UV radiation. Thermal bridge-reduced subcontracted assembly is possible, e.g. with:  

More information on : www.ejot.de

Applications :
The EJOT Trawik-Set F (assembly area parallel to the facade) comprises black coloured, rot-proof and CFC-free PU rigid foam plastics (polyurethane) with a foamed steel plate for the friction-locked bolting with the substrate, on an aluminium plate for the bolting of the assembly object as well as a compact plate (HPL), which guarantees an optimum pressure distribution on the surface.  

Properties :
 

Technical specifications :
EJOT Trawik-Set F (surface de montage parallèle à la façade) est constitué d'une mousse rigide PU (polyuréthane) imputrescible sans CFC colorée en noir avec une tôle d'acier moulée, destinée à un vissage solidaire avec le support, d'une plaque en alu pour le vissage de l'objet à monter, ainsi que d'une plaque compacte (HPL) garantissant une répartition optimale de la pression exercée sur la surface.   La livraison contient 3 pièces EJOT SDF-KB 10 H x 120   Dimensions Surface de base : 280 x 125 mm Types T : 80 à 300 mm Plaque compacte : 117 x 65 x 6 mm Surface utile : 97 x 45 mm épaisseur de la plaque alu : 6 mm écart entre les trous : 100 x 100 mm Poids volumique PU : 350 kg/m³   EJOT Trawik-Set F-M pour la fixation mécanique dans la maçonnerie pleine et la maçonnerie creuse Chevilles : EJOT SDF-KB 10 H x 120 Diamètre de perçage : 10 mm profondeur de perçage min. : 80 mm Profondeur d'ancrage min. : 70 mm Porte-outil : C/P13 / T40

More information on : www.ejot.de

Applications :
The EJOT Trawik-Set L (assembly area vertical to the facade) comprises black coloured, rot-proof and CFC-free PU rigid foam plastics (polyurethane) with a foamed steel plate for the friction-locked bolting with the substrate, on an aluminium plate for the bolting of the assembly object as well as a compact plate (HPL), which guarantees an optimum pressure distribution on the surface.  

Properties :
Dimensions Base: 280 x 125 mm Types T: 80 - 300 mm Compact sheet: 117 x 65 x 6 mm Effective area: 97x45 mm Thickness of aluminium plate: 6 mm Hole spacing: 100 x 100 mm Mass density PU: 350 kg/m³

Technical specifications :
El EJOT Trawik-Set L (superficie de montaje vertical a la fachada) comprende plásticos en espuma rígida de poliuretano (PU), sin CFC, resistentes a la putrefacción y de color negro, con una placa de acero recubierta de espuma para un empernado con la subestructura que impide el deslizamiento, sobre una placa de aluminio para el empernado del elemento objeto de montaje así como una placa compacta (HPL), que garantiza una distribución óptima de la presión sobre la superficie.   El alcance del suministro incluye 3 EJOT SDF-KB 10 V x 100   Dimensiones Base: 280 x 125 mm Tipos T: 80 - 300 mm Chapa compacta: 117 x 65 x 6 mm Superficie útil: 97 x 45 mm Grosor de la placa de aluminio: 6 mm Distancia entre taladros: 100 x 100 mm Densidad PU: 350 kg/m³   EJOT Trawik-Set L-C para fijación mecánica a bloque macizo y hueco Anclaje: EJOT SDF-KB 10 V x 100 Diámetro de taladro: 10 mm Profundidad mín. de taladro: 60 mm Profundidad mín. de empotrado: 50 mm Montaje con herramienta: A/F13 / T40

More information on : www.ejot.de

Applications :
The EJOT Trawik-Set L (assembly area vertical to the facade) comprises black coloured, rot-proof and CFC-free PU rigid foam plastics (polyurethane) with a foamed steel plate for the friction-locked bolting with the substrate, on an aluminium plate for the bolting of the assembly object as well as a compact plate (HPL), which guarantees an optimum pressure distribution on the surface.  

Properties :
 

Technical specifications :
EJOT Trawik-Set L (surface de montage perpendiculaire à la façade) est constitué d'une mousse rigide PU (polyuréthane) imputrescible sans CFC colorée en noir avec une tôle d'acier moulée, destinée à un vissage solidaire avec le support, d'une plaque en alu pour le vissage de l'objet à monter, ainsi que d'une plaque compacte (HPL) garantissant une répartition optimale de la pression exercée sur la surface.   La livraison contient 3 pièces EJOT SDF-KB 10 H x 120   Dimensions Surface de base : 280 x 125 mm Types T : 80 à 300 mm Plaque compacte : 117 x 65 x 6 mm Surface utile : 97 x 45 mm épaisseur de la plaque alu : 6 mm écart entre les trous : 100 x 100 mm Poids volumique PU : 350 kg/m³   EJOT Trawik-Set L-M pour la fixation mécanique dans la maçonnerie pleine et la maçonnerie creuse Chevilles : EJOT SDF-KB 10 H x 120 Diamètre de perçage : 10 mm Profondeur de perçage min. : 80 mm Profondeur d'ancrage min. : 70 mm Porte-outil : C/P13 / T40

More information on : www.ejot.de