Applications :
Embedment of support profiles with steel rods for rainscreen applications
Embedment of suspended ceilings
Fastening of threaded sleeves
Thickness of the non-load-carrying render layer ttol [mm]:
For anchor length 80 mm: 0-10 mm
For anchor length 100 mm: 10-30 mm
Note
Please note the European Technical Approval ETA-12/0502 in your planning and in the processing of the products. Further information about parameters and loads can be found in the approval under the tab "Download".
Properties :
Facade anchor with two-stage screw
Reliable form-fit in the substrate due to combined expansion zones
High load-carrying capacity
Technical specifications :
Characteristic values
Drive: A/F13
Length M8 threaded connection: 13 mm
Drill hole depth ≥ t: +90 mm
Embedment depth ≥ t: 70 mm
Characteristic loads
Compressive strength aerated concrete [N/mm2]
Aerated concrete 2: 0,75 kN
Aerated concrete 3: 1,31 kN
Aerated concrete 4: 1,87 kN
Aerated concrete 6: 3,00 kN
Partial safety factor: γMAAC: 2,0 kN
Characteristic bending moment
Stainless steel screw: 20,6 Nm / γMs 1,87
Temperature range 50 °C / 80 °C: 4.00 kN
FRk Brick Mz 20-1.8, NF: 2.50 kN
FRk Solid lime sand brick KS 36, NF: 4.00 kN
FRk Solid lime sand brick KS 20, 8 DF: 4,50 kN
Transverse load VRk,s in concrete C12/15 at hnom,1 = 40 mm
Anchor with stainless steel screw A4: 9.12 kN
Transverse load VRk,s at hnom,2 = 50 mm
Anchor with stainless steel screw A4: 12.94 kN
Bending moment MRk,s at hnom,1 =40 mm
Anchor with stainless steel screw A4: 16.09 kN
Side load MRk,s at hnom,2 = 50 mm
Anchor with stainless steel screw A4: 26.62 Nm
More information on : www.ejot.de
