Applications :
Brick slip system anchor for concrete and masonry
For concrete, solid and perforated masonry
Anchor tube with small countersunk head for unobtrusive installation in the joint
Properties :
Approved for concrete, solid and perforated masonry (A, B, C, D)
Anchor tube with small countersunk head for unobtrusive installation in the joint
Torsion-proof anchor tube
Universal expansion zone for safe anchoring
High loads
Anchor with increased bending moment
Premounted screw for quick installation
German DIBt approval: Z-21.2-589
Technical specifications :
Anchor diameter: 8 mm
Diameter of countersunk head: 12 mm
Drill hole depth h1 ≥: 80 mm
Embedment depth hef ≥: 70 mm
Screw drive: TORX T30
German DIBt approval: Z-21.2-589
Characteristic loads:
Building material class A:
Normal weight concrete ≥ C 12/15 acc. to EN 206-1: 1.0 kN
Pre-cast concrete Panel ≥ B15: 0.25 kN
Building material class B:
Clay bricks(≥ Mz 12) acc. to DIN 105: 0.4 kN
Solid lime sandstone (≥ KS 12) acc. to DIN EN 106: 0.4 kN
Solid masonry of lightweight concrete (V) acc. to DIN 18152: 0.2 kN
Building material class C:
Vertically perforated clay bricks (Hlz) acc. to DIN 105: *
Vertical coring reference brick (Hlz) acc. to ÖNORM B 6124: 0.75 kN
Sand-lime perforated bricks (≥ KSL 6) acc. to DIN EN 106: 0.25 kN
Lightweight concrete hollow blocks (≥ HbL 2) acc. to DIN 18151: 0.15 kN
Building material class D:
Lightweight aggregate concrete acc. to TGL: 0.3 kN
*According to approval to be determined throught pull-out testing at the building.
The design loads given are in accordance with the German building code. National safety factors are already incorporated. Please observe the approval.
More information on : www.ejot.de
