Tiplovi za fasadu i ventilisanu fasadu

Applications :
For fixing metal substructures to solid brick masonry and concrete For installation in rain screen Please note approval Z-21-2-589        

Properties :
Hexagon head with flange Small drill-hole diameter Cr(VI)-free coating Thermal and galvanic separation Product identification through different sleeve colours        

Technical specifications :
A/F10 hexagon drive Drill hole depth ≥ t: 60 mm Embedment depth ≥: hv 50 mm        

More information on : www.ejot.de

Applications :
Installation of metal components Plastic anchor for multiple use in concrete and masonry for non structural applications Suitable for the structural fastening of cladding and metal angle pieces For installation in rain screen Notes Please note the European Technical Approval ETA-10/0305 in your planning and in the processing of the products. Further information about parameters and loads can be found in the approval.        

Properties :
approved for all common building materials reliable installation in problematic building material due to optimised expansion part secure hold due to radial expansion Cr VI-free coating of the screw Product identification through different sleeve colours double safety lock against torsion for secure installation Installation substrate Approved for: Concrete Solid brick Solid lime sand brick Solid lightweight concrete brick Vertically perforated brick Lightweight vertically perforated brick Perforated lime sand brick Lightweight concrete cavity blocks Porous lightweight concrete Suitable for: natural stone Plaster board non-classified cavity and perforated brick        

Technical specifications :
CHARACTERISTIC VALUES drill hole depth h1 ≥ 80 mm effective embedment depth hnom ≥ 70 mm Drill-hole diameter d0 ≥10 mm Hole diameter of construction part to be installed df ≤ 10.5 mm Drive: hexagon A/F13 + hexalobular / TORX® T40 Characteristic values Tensile load NRk,p in concrete C12/15 Temperature range 30 °C / 50 °C: 4,50 kN Temperature range 50 °C / 80 °C: 4,00 kN Brick Mz 20-1.8, NF: 4.00 kN Solid lime sand brick KS 36, NF: 4.50 kN Solid lime sand brick KS 20, 8 DF: 4.50 kN Solid lightweight concrete brick V6, 2 DF: 2.00 kN Porous lightweight concrete: 2.00 kN Vertically perforated brick HLz 12-0.9, NF: 2.00 kN Perforated lime sand brick KSL 12, 4 DF: 2.50 kN Cavity block tile made of lightweight concrete Hbl 10, 12 DF 1.20 kN Transverse load VRk,s Anchor with steel screw: 9.35 kN Anchor with stainless steel screw A4: 10.91 kN Bending moment MRk,s Anchor with steel screw: 17.67 Nm Anchor with stainless steel screw A4: 20.62 Nm Permitted load* Tensile load Nper in concrete C12/15 Temperature range 30 °C / 50 °C: 1.79 kN Temperature range 50 °C / 80 °C: 1.59 kN Brick Mz 20-1.8, NF: 1.14 kN Solid lime sand brick KS 36, NF: 1.29 kN Solid lime sand brick KS 20, 8 DF: 1.29 kN Solid lightweight concrete brick V6, 2 DF: 0.57 kN Porous lightweight concrete: 0.57 kN Vertically perforated brick HLz 12-0.9, NF: 0.57 kN Perforated lime sand brick KSL 12, 4 DF: 0.71 kN Cavity block tile made of lightweight concrete Hbl 10, 12 DF: 0.34 kN Transverse load Vzul Anchor with steel screw: 5.34 kN Anchor with stainless steel screw A4: 5.00 kN Max. permitted side load Anchor with steel screw: 10.10 Nm Anchor with stainless steel screw A4: 9.44 Nm        

More information on : www.ejot.de

Applications :
Time saving anchor for light fastenings: substructures, wardrobes, floorboards, bars, cable racks, cable clamps, tube holders For dry indoor conditions

Properties :
Polyamid countersunk anchor Nail screw with steel countersunk head, galvanized zinc plated

More information on : www.ejot.de

Applications :
Brick slip system anchor for concrete and masonry For concrete, solid and perforated masonry Anchor tube with small countersunk head for unobtrusive installation in the joint        

Properties :
Approved for concrete, solid and perforated masonry (A, B, C, D) Anchor tube with small countersunk head for unobtrusive installation in the joint Torsion-proof anchor tube Universal expansion zone for safe anchoring High loads Anchor with increased bending moment Premounted screw for quick installation German DIBt approval: Z-21.2-589        

Technical specifications :
Anchor diameter: 8 mm Diameter of countersunk head: 12 mm Drill hole depth h1 ≥: 80 mm Embedment depth hef ≥:  70 mm Screw drive: TORX T30 German DIBt approval: Z-21.2-589 Characteristic loads: Building material class A: Normal weight concrete ≥ C 12/15 acc. to EN 206-1: 1.0 kN Pre-cast concrete Panel ≥ B15: 0.25 kN Building material class B: Clay bricks(≥ Mz 12) acc. to DIN 105: 0.4 kN Solid lime sandstone (≥ KS 12) acc. to DIN EN 106: 0.4 kN Solid masonry of lightweight concrete (V) acc. to DIN 18152: 0.2 kN Building material class C: Vertically perforated clay bricks (Hlz) acc. to DIN 105: * Vertical coring reference brick (Hlz) acc. to ÖNORM B 6124: 0.75 kN Sand-lime perforated bricks (≥ KSL 6) acc. to DIN EN 106: 0.25 kN Lightweight concrete hollow blocks (≥ HbL 2) acc. to DIN 18151: 0.15 kN Building material class D: Lightweight aggregate concrete acc. to TGL: 0.3 kN *According to approval to be determined throught pull-out testing at the building. The design loads given are in accordance with the German building code. National safety factors are already incorporated. Please observe the approval.          

More information on : www.ejot.de

Applications :
Installation of wood or metal parts Plastic anchors for multiple use in concrete and masonry for non-structural applications suitable for the structural fastening of gates, doors, windows, square timber Note Please note the European Technical Approval ETA-10/0305 in your planning and in the processing of the products. Further information about parameters and loads can be found in the approval.        

Properties :
Anchor with an embedment depth of 40 mm in concrete Two installation depths (embedment in masonry 50 mm) Very short expansion part, for short installation times Optimal expanding part due to radial expansion Very high bending moment Cr VI-free coating of the screw Product identification through different sleeve colours double safety lock against torsion for secure installation with countersunk head        

Technical specifications :
Characteristic values Hole depth in concrete h1.1: ≥ 50 mm Effective embedment depth in concrete hnom,1: ≥ 40 mm Hole depth in masonry h1.2: ≥ 60 mm Effective embedment depth in masonry hnom,2: ≥ 50 mm Drill-hole diameter d0: 10 mm Hole diameter of construction part to be installed df:Ø 10.5 mm Drive: hexalobular / TORX® T40 Characteristic loads Tensile load NRk,p in concrete C12/15 Temperature range 30 °C / 50 °C: 4.50 kN Temperature range 50 °C / 80 °C: 4.00 kN FRk Brick Mz 20-1.8, NF: 2.50 kN FRk Solid lime sand brick KS 36, NF: 4.00 kN FRk Solid lime sand brick KS 20, 8 DF: 4.50 kN Transverse load VRk,s in concrete C12/15 at hnom,1 = 40 mm Anchor with steel screw: 7.93 kN Anchor with stainless steel screw A4: 9.12 kN Transverse load VRk,s at hnom,2 = 50 mm Anchor with steel screw: 11.09 kN Anchor with stainless steel screw A4: 12.94 kN Bending moment MRk,s at hnom,1 =40 mm Anchor with steel screw: 13.80 Nm Anchor with stainless steel screw A4: 16.09 Nm Side load MRk,s at hnom,2 = 50 mm        

More information on : www.ejot.de

Applications :
For fixing timber substructure to gas concrete For fixing timber substructure to gas concrete from Laußig and Parchim Note For planning and processing please note approval ETA-12/050        

Properties :
Reliable form-fit due to combined expansion zones Cr(VI)-free coating Fast rotary hole drilling Product identification through different sleeve colours High embedment stability even in soft gas concrete        

Technical specifications :
CHARACTERISTIC VALUES Drive: hexalobular / TORX® T40 Drill hole depth ≥ t: 80 mm Embedment depth ≥hv: 70 mm Permitted loads Gas concrete PP2 / P3.3 acc. to DIN: 0.3 kN Gas concrete ≥ PP4 / P4.4 acc. to DIN: 0.6 kN Gas concrete in accordance with TGL Werk Laußig: 0.4 kN Gas concrete in accordance with TGL Werk Parchim: 0.2 kN Maximum allowable bending moment steel: 11.5 Nm Maximum allowable bending moment stainless steel: 13.0 Nm        

More information on : www.ejot.de

Applications :
For fixing timber substructure to gas concrete For fixing timber substructure to gas concrete from Laußig and Parchim Note For planning and processing please note approval ETA-12/050        

Properties :
Reliable form-fit due to combined expansion zones Cr(VI)-free coating Fast rotary hole drilling Product identification through different sleeve colours High embedment stability even in soft gas concrete        

Technical specifications :
CHARACTERISTIC VALUES Drive: hexalobular / TORX® T40 Drill hole depth ≥ t: 80 mm Embedment depth ≥hv: 70 mm Permitted loads Gas concrete PP2 / P3.3 acc. to DIN: 0.3 kN Gas concrete ≥ PP4 / P4.4 acc. to DIN: 0.6 kN Gas concrete in accordance with TGL Werk Laußig: 0.4 kN Gas concrete in accordance with TGL Werk Parchim: 0.2 kN Maximum allowable bending moment steel: 11.5 Nm Maximum allowable bending moment stainless steel: 13.0 Nm        

More information on : www.ejot.de

Applications :
Installation of metal components Plastic anchors for multiple use in concrete and masonry for non-structural applications Suitable for the structural fastening of wall cupboards, cladding, metal angle pieces Note Please note the European Technical Approval ETA-10/0305 in your planning and in the processing of the products. Further information about parameters and loads can be found in the approval.        

Properties :
Anchor with an embedment depth of 40 mm in concrete Two installation depths (embedment in masonry 50 mm) Very short expansion part, for short installation times Optimal expanding part due to radial expansion Very high bending moment Cr VI-free coating of the screw Product identification through different sleeve colours double safety lock against torsion for secure installation        

Technical specifications :
Characteristic values Hole depth in concrete h1.1: ≥ 50 mm Effective embedment depth in concrete hnom,1: ≥ 40 mm Hole depth in masonry h1.2: ≥ 60 mm Effective embedment depth in masonry hnom,2: ≥ 50 mm Drill-hole diameter d0: 10 mm Hole diameter of construction part to be installed df:Ø 10.5 mm Drive: hexalobular / TORX® T40 Characteristic loads Tensile load NRk,p in concrete C12/15 Temperature range 30 °C / 50 °C: 4.50 kN Temperature range 50 °C / 80 °C: 4.00 kN FRk Brick Mz 20-1.8, NF: 2.50 kN FRk Solid lime sand brick KS 36, NF: 4.00 kN FRk Solid lime sand brick KS 20, 8 DF: 4.50 kN Transverse load VRk,s in concrete C12/15 at hnom,1 = 40 mm Anchor with steel screw: 7.93 kN Anchor with stainless steel screw A4: 9.12 kN Transverse load VRk,s at hnom,2 = 50 mm Anchor with steel screw: 11.09 kN Anchor with stainless steel screw A4: 12.94 kN Bending moment MRk,s at hnom,1 =40 mm Anchor with steel screw: 13.80 Nm Anchor with stainless steel screw A4: 16.09 Nm Side load MRk,s at hnom,2 = 50 mm        

More information on : www.ejot.de

Applications :
Application range Installation of wood or metal parts Plastic anchors for multiple use in concrete and masonry for non-structural applications suitable for the structural fastening of gates, doors, windows, square timber For installation in rain screen Note Please note the European Technical Approval ETA-10/0305 in your planning and in the processing of the products. Further information about parameters and loads can be found in the approval.        

Properties :
approved for all common building materials Reliable hold in problematic building material due to optimised expansion part secure hold due to radial expansion Cr VI-free coating of the screw Product identification through different sleeve colours double safety lock against torsion for secure installation        

Technical specifications :
Characteristic values drill hole depth h1 ≥ 80 mm effective embedment depth hnom ≥ 70 mm Drill-hole diameter d0: = 10 mm Hole diameter of construction part to be installed df: Ø 10.5 mm Drive: hexalobular / TORX® T40 Characteristic values Tensile load NRk,p in concrete C12/15 Temperature range 30 °C / 50 °C: 4.50 kN Temperature range 50 °C / 80 °C: 4.00 kN Brick Mz 20-1.8, NF: 4.00 kN Solid lime sand brick KS 36, NF: 4.50 kN Solid lime sand brick KS 20, 8 DF: 4.50 kN Solid lightweight concrete brick V6, 2 DF: 2.00 kN Porous lightweight concrete: 2.00 kN Vertically perforated brick HLz 12-0.9. NF: 2.00 kN Perforated lime sand brick KSL 12, 4 DF: 2.50 kN Cavity block tile made of lightweight concrete Hbl 10, DF: 1.20 kN Transverse load VRk,s Anchor with steel screw: 9.35 kN        

More information on : www.ejot.de

Applications :
Installation of metal components For all non-load carrying redundant systems according to ETAG 020 Suitable for the structural fastening of wall cupboards, cladding, metal angle pieces Note: For planning please note the characteristic load values of the approval.        

Properties :
Approved for all common building materials Reliable hold in problematic building material due to optimised expansion part Secure hold due to radial expansion Cr VI-free coating of the screw Product identification through different sleeve colours Double safety lock against torsion for secure installation        

Technical specifications :
A/F17 hexagon drive Drill hole depth ≥ t: 80 mm Embedment depth ≥: hv 70 mm        

More information on : www.ejot.de

Applications :
Embedment of support profiles with steel rods for rainscreen applications Embedment of suspended ceilings Fastening of threaded sleeves Thickness of the non-load carrying render layer ttol: For anchor length 80 mm: 0-10 mm* For anchor length 100 mm: 0-30 mm* Note   Please note the European Technical Approval ETA-10/0305 in your planning and in the processing of the products. Further information about parameters and loads can be found in the approval under the tab "Download".   * The load-carrying capacity and the influence of larger embedment depths in hollow or perforated brick (hnom > 70 mm) and/or different stones (acc. to ETA-10/0305 with regards to stone size, compression strength and hole pattern) has to be determined by tests on the building.          

Properties :
Approved for all common building materials Reliable hold in problematic building material due to optimised expansion part Secure hold due to radial expansion Product identification through different sleeve colours Double safety lock against torsion for secure installation        

Technical specifications :
Characteristic values Drill hole depth ≥ t: 90 mm Effective embedment depth: hnom: ≥ 70 mm Drill-hole diameter d0: 10 mm Clearance hole in the connected assembly part: drill hole diameter df: ≤ 10.5 mm Drive: A/F13 Length M8 threaded connection: 13 mm Characteristic loads Tensile load NRk,p in concrete C12/15 Temperature range 30 °C / 50 °C: 4.50 kN Temperature range 50 °C / 80 °C: 4.00 kN Brick Mz 20-1.8, NF: 4.00 kN Solid lime sand brick KS 36, NF: 4.50 kN Solid lime sand brick KS 20, 8 DF: 4.50 kN Solid lightweight concrete brick V6, 2 DF: 4.50 kN Vertically perforated brick HLz 12-0.9, NF: 2.00 kN Perforated lime sand brick KSL 12,4 DF: 2.50 kN Cavity block tile made of lime concrete Hbl 10, 12 DF 1.20 kN Transverse load VRk,s Anchor with stainless steel screw A4: 10.91 kN Bending moment MRk,s Anchor with stainless steel screw A4: 20.62 kN        

More information on : www.ejot.de

Applications :
Embedment of support profiles with steel rods for rainscreen applications Embedment of suspended ceilings Fastening of threaded sleeves Note   Please note the European Technical Approval ETA-10/0305 in your planning and in the processing of the products. Further information about parameters and loads can be found in the approval under the tab "Downloads".          

Properties :
Anchor with minimal embedment depth in concrete Very short expansion part, for short installation times Optimal expanding part due to radial expansion Very high bending moment Product identification through different sleeve colours Double safety lock against torsion for secure installation        

Technical specifications :
Characteristic values Hole depth in concrete h1,1: ≥ 70 mm Hole depth in concrete h1,1: ≥ 40 mm Hole depth in concrete h1,2: ≥ 70 mm Effective embedment depth in masonry hnom,2: ≥ 50 mm Drill-hole diameter d0: 10 mm Drive: A/F13 Length M8 threaded connection: 13 mm Characteristic loads Tensile load NRk,p in concrete C12/15    Temperature range 30 °C / 50 °C: 4.50 kN    Temperature range 50 °C / 80 °C: 4.00 kN FRk Brick Mz 20-1.8, NF: 2.50 kN FRk Solid lime sand brick KS 36, NF: 4.00 kN FRk Solid lime sand brick KS 20, 8 DF: 4,50 kN Transverse load VRk,s in concrete C12/15 at hnom,1 = 40 mm    Anchor with stainless steel screw A4: 9.12 kN Transverse load VRk,s at hnom,2 = 50 mm    Anchor with stainless steel screw A4: 12.94 kN Bending moment MRk,s at hnom,1 =40 mm    Anchor with stainless steel screw A4: 16.09 kN Side load MRk,s at hnom,2 = 50 mm    Anchor with stainless steel screw A4: 26.62 Nm        

More information on : www.ejot.de

Applications :
Installation of wood or metal components For all non-load carrying redundant systems according to ETAG 020 Suitable for the structural fastening of gates, doors, windows, square timber Note: For planning please note the characteristic load values of the approval.        

Properties :
Approved for all common building materials Reliable hold in problematic building material due to optimised expansion part Secure hold due to radial expansion Cr VI-free coating of the screw Product identification through different sleeve colours Double safety lock against torsion for secure installation        

Technical specifications :
Drive: hexalobular T40 Drill hole depth ≥ t: 80 mm Embedment depth ≥: hv 70 mm        

More information on : www.ejot.de

Applications :
For fixing timber substructures to solid brick masonry and concrete For installation in rain screen Please note approval Z-21-2-589        

Properties :
Small drill-hole diameter Cr(VI)-free coating Product identification through different sleeve colours        

Technical specifications :
Drive: hexalobular T30 Drill hole depth ≥ t: 60 mm Embedment depth ≥ hv: 50 mm        

More information on : www.ejot.de

Applications :
Embedment of support profiles with steel rods for rainscreen applications Embedment of suspended ceilings Fastening of threaded sleeves Thickness of the non-load-carrying render layer ttol [mm]: For anchor length 80 mm: 0-10 mm For anchor length 100 mm: 10-30 mm Note Please note the European Technical Approval ETA-12/0502 in your planning and in the processing of the products. Further information about parameters and loads can be found in the approval under the tab "Download".        

Properties :
Facade anchor with two-stage screw Reliable form-fit in the substrate due to combined expansion zones High load-carrying capacity        

Technical specifications :
Characteristic values Drive: A/F13 Length M8 threaded connection: 13 mm Drill hole depth ≥ t: +90 mm Embedment depth ≥ t: 70 mm Characteristic loads Compressive strength aerated concrete [N/mm2] Aerated concrete 2: 0,75 kN Aerated concrete 3: 1,31 kN Aerated concrete 4: 1,87 kN Aerated concrete 6: 3,00 kN Partial safety factor: γMAAC: 2,0 kN Characteristic bending moment Stainless steel screw: 20,6 Nm / γMs 1,87 Temperature range 50 °C / 80 °C: 4.00 kN FRk Brick Mz 20-1.8, NF: 2.50 kN FRk Solid lime sand brick KS 36, NF: 4.00 kN FRk Solid lime sand brick KS 20, 8 DF: 4,50 kN Transverse load VRk,s in concrete C12/15 at hnom,1 = 40 mm Anchor with stainless steel screw A4: 9.12 kN Transverse load VRk,s at hnom,2 = 50 mm Anchor with stainless steel screw A4: 12.94 kN Bending moment MRk,s at hnom,1 =40 mm Anchor with stainless steel screw A4: 16.09 kN Side load MRk,s at hnom,2 = 50 mm Anchor with stainless steel screw A4: 26.62 Nm        

More information on : www.ejot.de

Applications :
For fast and adhesive-free subsequent installation of curtain walls. For load-bearing shells made of concrete, solid brick and perforated brick Note The EJOT® VSD double expansion wall anchor enables the subsequent renovation of double-leaf masonry. Advanced corrosion or a complete lack of wire anchor can lead to decreased stability of the outer leaf and possibly cause considerable physical injury. In particular curtain walls made before 1979 should be subject to further inspection. When renovating the outer facade the stability of the curtain wall must be verified. The EJOT VSD is a particularly cost-effective solution for subsequent installation between load-bearing shell and outer leaf.        

Properties :
Building authorities approved anchor for subsequent installation of curtain walls Double expansion wall anchor: simultaneous embedment in load-bearing wall and outer leaf Clean and fast installation (no mortar required) Universal expansion zone: secure installation into concrete load-bearing shells, solid and perforated brick The use of A4 stainless steel screws guarantees corrosion protection 100 % installation control Temperature-independent installation Can be installed at 0 °C        

Technical specifications :
Embedment depth hef: ≥ 70 mm Drill hole depth ts: ≥ ld + 10 mm Nominal drill diiameter: 8 mm Minimum thickness of the outer sheet: 115 mm Drive: Hexalobular drive T30          

More information on : www.ejot.de

Applications :
For connecting profile rails Simply clip onto the rail elements to be connected Facilitates the precise adjustment of base rails Available length: 30 mm each and 1,150 mm

More information on : www.ejot.de

Applications :
Brick slip system anchor for aerated concrete For aerated concrete (E) Anchor tube with small countersunk head for unobtrusive installation in the joint

Properties :
Approved for aerated concrete (E) Anchor tube with small countersunk head for unobtrusive installation in the joint Distort-proof anchor tube Special expansion zone with hooks for form-fit anchoring High loads Premounted screw for quick installation German DIBt approval: Z-21.2-967

Technical specifications :
Anchor diameter: 8 mm Diameter of countersunk head: 12 mm Drill hole depth h1 ≥: 120 mm Embedment depth hef≥:  110 mm Screw drive: TORX T30 German DIBt approval: Z-21.2-967 Design loads: Building material class E: Autoclaved aerated concrete acc. DIN (2 and 3,3 resp.): 0.2 kN Autoclaved aerated concrete acc. DIN (4 and 4,4 resp.): 0.5 kN Autoclaved aerated concrete acc. TGL (Laußig plant): 0.3 kN Autoclaved aerated concrete acc. DIN TGL (Parchim plant): 0.5 kN The design loads given are in accordance with the German building code. National safety factors are already incorporated. Please observe the approval.

More information on : www.ejot.de

Applications :
Fastening of rail-systems Hammer-in anchor for rails For fixing holding and base rails Approved for concrete, solid and perforated masonry        

Properties :
Approved for concrete, solid and perforated masonry Shortest embedment depths, minimum drill hole depths High loads for high security • Premounted nail for quick installation To compensate facade tolerances use spacers EJOT AS        

Technical specifications :
Anchor diameter: 8 mm Collar diameter:16 mm Drill hole depth h1 >: 35 mm  Embedment depth hef >: 25 mm Use categories acc. to ETA: A, B, C European Technical Approval: ETA-05/0009 Values in parentheses: anchoring in aerated concrete (use category E)        

More information on : www.ejot.de

Applications :
Fastening of rail-systems Screw-in anchor for rails For fixing holding and base rails Approved for all categories of building materials        

Properties :
Approved for all categories of building materials Shortest embedment depths, minimum drill hole depths Highest loads for maximum safety Economic anchor usage Premounted screw for quick installation To compensate facade tolerances use spacers EJOT AS        

Technical specifications :
Anchor diameter: 8 mm Collar diameter:16 mm Drill hole depth h1 >: 35 mm (75 mm) Embedment depth hef >: 25 mm (65 mm) Screw drive: TORX T30 Use categories acc. to ETA: A, B, C, D German DIBt approval: Z-21.2-1769 European Technical Approval: ETA-04/0023 Values in parentheses: anchoring in aerated concrete (use category E)        

More information on : www.ejot.de