Applications :
Side lap stitching of profiled steel sheet
Properties :
Case-hardened, zinc-plated steel with innovative screw point geometry
With free spin zone under screw head for side lap stitching
Non-skid application
Fastening without swarf
Callated (20 per cartidrige) suitable for fixing with the EJOFAST® JF screwdriver
Technical specifications :
Drill capacity tI + tII: 0.88 + 0.88 mm
Head geometry: Hexagon head
Drive: Hexagon AF8
More information on : www.ejot.de
Applications :
Transom fastening
Direct installation into timber and PVC
Properties :
Partial Thread
Case-hardened steel
Technical specifications :
Head diameter: 11.5 mm
Drive: T30
Note
Check pre-drilling, when installing into hard wood
More information on : www.ejot.de
Applications :
To form floating and fixed points on substructures of rear ventilated facades
Fastening pre-drilled stainless steel or aluminium wall brackets to aluminium support profiles
For component assemblies from 6.0–7.0 mm (component I + component II)
Technical specifications :
Drilling capacity: 2.0 mm
Drive: hexagon A/F 8
Flange head: Ø 13 mm
Material: A2 stainless steel
Length non-threaded part: 7.0 mm
More information on : www.ejot.de
Anwendungen :
Verschraubung von Aluminiumprofilen auf Aluminiumunterkonstruktionen ≤ 3 mm
Eigenschaften :
Edelstahl A2
Technische Daten :
Bohrkapazität tI + tII: 1,0 + 3,0 mm
Antrieb: Sechskant SW8
Einschraubdrehzahl: max. 1500 1/min
Weitere Informationen unter: www.ejot.de
Applications :
Fastening aluminium profiles to aluminium substructure ≤4 mm
Properties :
A2 stainless steel
Technical specifications :
Drilling capacity tI + tII: 2.0 + 4.0 mm
Drive: Hexagon AF8
More information on : www.ejot.de
Anwendungen :
Verschraubung von Aluminiumwellprofilblechen auf Holzunterkonstruktionen
Verschraubung von Fassadenplatten auf Holzunterkonstruktionen
Eigenschaften :
Edelstahl A2
Dichtscheibe aus Edelstahl
Dichtscheibe unverlierbar vormontiert
Gewinde nach DIN 7998
Technische Daten :
Bohrkapazität tI + tII: 0,5 - 2,0 mm
Antrieb: Innensechsrund TORX® T25
Einschraubdrehzahl: max. 1500 1/min
Weitere Informationen unter: www.ejot.de
Applications :
Fastener for ALUCOBOND® external wall cladding according to Z-33.2-6
We recommend the tapered special bit TORX® T25W-1/4"/Cx25 for force fit in the fastener head.
Properties :
A2 stainless steel
Fastener heads in ALUCOBOND® standard and special colours available (delivery time approx. 10 work days)
Advantages
Centred drilling and simultaneous fastening of the boards to the substructure
No pre-drilling of the substructre
Technical specifications :
Drilling capacity tI + tII: 1.0 + 3.0 mm
Drive: Hexalobular T25
Ø drill hole centring bush: 8.0 mm
More information on : www.ejot.de
Applications :
Fastening aluminium corrugated profile sheet to aluminium substructure ≤ 3 mm
Fastening facade panels to aluminium substructure
Properties :
A2 stainless steel
Technical specifications :
Drilling capacity tI + tII: 1.0 + 3.0 mm
Drive: Hexalobular TORX® T25
More information on : www.ejot.de
Applications :
Fastening aluminium corrugated profile sheet to aluminium substructure ≤ 3 mm
Fastening facade panels to aluminium substructure
Properties :
A2 stainless steel
Technical specifications :
Drill capacity tI + tII: 1.0 + 3.0 mm
Drive: Hexalobular TORX® T25
More information on : www.ejot.de
Applications :
Fastening fibre cement corrugated sheets to timber substructures
Note
Suitable for covering with fibre cement corrugated sheet profile 177/51 P5 and P6 to timber substructure without insulation. For the dimensioning and the use of fastening materials please note the manufacturer's instructions for use as well as the national approvals.
Properties :
A2 stainless steel
Pre-assembled FZD sealing washer
A2 stainless steel washer
Screw wings save additional drilling into the corrugated slabs
Reduced forcing tension
Technical specifications :
Drive: Hexagon AF8
More information on : www.ejot.de
Applications :
Fastening facade panels to aluminium substructure ≤ 2 mm
Note
Please note the respective approval of the facade panel and the assembly instructions of the manufacturer.
Properties :
A2 stainless steel
Pan head
Technical specifications :
Drilling capacity (tI pre-drilled) + tII: 1.5–2.0 mm
Drive: Hexalobular T25
Head diameter: 16 mm
Head height: 2 mm
Length non-threaded part: 6.0 mm
More information on : www.ejot.de
Applications :
Fastening facade panels to timber and aluminium substructure
Note
Please note the respective approval of the facade panel and the assembly instructions of the manufacturer.
Properties :
A2 stainless steel
Pan head
Technical specifications :
Drilling capacity (tI pre-drilled) + tII: 1.5–2.0 mm
Drive: Hexalobular T25
Head diameter: 16 mm
Head height: 2 mm
Length non-threaded part: 6.0 mm
More information on : www.ejot.de
Anwendungen :
Zur Befestigung von Fassadenplatten auf Aluminiumunterkonstruktionen 1,5-3,0 mm
Kombinierbar mit LT-Fest- und Gleitpunkthülsen
Hinweis
Bitte beachten Sie die jeweilige Zulassung der Fassadenplatte sowie die Montagevorschriften des Herstellers.
Eigenschaften :
Edelstahl A2
Linsenkopf
Vorteile
Abdeckung von Langlöchern und großen Vorbohrdurchmessern
Auch in RAL-Lackierung erhältlich
Ästhetische Fassadengestaltung durch sehr flachen Schraubenkopf
Taumelfreie Verschraubung durch Verwendung des LT-Tools
Technische Daten :
Bohrkapazität (tI vorgelocht) tII: 1,5–30 mm
Antrieb: Innensechsrund T25
Kopfdurchmesser: 16 mm
Kopfhöhe: 2 mm
Weitere Informationen unter: www.ejot.de
Applications :
Fastening timber laths to aluminium substructure ≤ 2 mm
Properties :
A2 stainless steel
Countersunk head with milling ribs
Technical specifications :
Drilling capacity tI + tII: 2.0 mm
Drive: Hexalobular TORX® T25
More information on : www.ejot.de
Anwendungen :
Zur konstruktiven Befestigung von ALUCOBOND®-Platten auf Aluminiumunterkonstruktionen 2,0 mm
Eigenschaften :
Edelstahl A2
Vorteile
Befestiger durchbohrt ALUCOBOND-Platte und Aluminium Unterkonstruktion
Gewindefreier Teil unter dem Schraubenkopf ermöglicht ein gewolltes Weiterdrehen des Schraubenkopfes nach Kopfauflage
Schneidring unter dem Schraubkopf schneidet Schutzfolie auf der Fassadenplatte ein
Schutzfolie kann nach erfolgter Montage von der ALUCOBOND-Platte rückstandslos entfernt werden
Auch in lackierter Ausführung erhältlich
Technische Daten :
Bohrkapazität tI + tII: 2,0 mm
Antrieb Innensechsrund: T25
Weitere Informationen unter: www.ejot.de
Applications :
Fastening profiled steel sheets to 1.5 – 5 mm steel substructure
Fastening profiled aluminium sheets and sandwich panels to 1.5-5 mm steel substructure
Technical specifications :
Drilling capacity tI + tII: 2.0 + 4.0 mm
Drive: Hexagon A/F8
Installation rotation speed: max. 1300 rpm
More information on : www.ejot.de
Applications :
To form floating and fixed points on substructures of rear ventilated facades
Fastening pre-drilled stainless steel or aluminium wall brackets to aluminium support profiles
For component assemblies from 3.1–5.0 mm (component I + component II)
Technical specifications :
Drilling capacity: 2.0 m
Drive: Hexagon AF8
Flange head: Ø 13 mm
Material: A4 stainless steel
Length non-threaded part: 5.0 mm
More information on : www.ejot.de
Applications :
To form floating and fixed points on aluminium substructures of rear ventilated facades
Fastening pre-drilled stainless steel or aluminium wall brackets to aluminium support profiles
For component assemblies from 6.0–7.0 mm (component I + component II)
Technical specifications :
Drilling capacity: 2.0 mm
Drive: Hexagon AF8
Flange head: Ø 13 mm
Material: A4 stainless steel
Length non-threaded part: 7.0 mm
More information on : www.ejot.de
Applications :
Fastening aluminium profiles to aluminium substructure ≤4 mm
Properties :
A4 stainless steel
Technical specifications :
Drilling capacity tI + tII: 2.0 + 4.0 mm
Drive: Hexagon AF8
More information on : www.ejot.de
Applications :
Fastening window handles
Properties :
With dog point
Quality grade 4.8
Technical specifications :
Head diameter: 9.0 mm
Drive: Cross recess PH 2
Thread type: metric
More information on : www.ejot.de
Applications :
For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement
Properties :
Roll-sorted quality for automated fastening
Case-hardened steel
Technical specifications :
Kopfdurchmesser: 7,5 mm
Antrieb: Kreuzschlitz PH 2
Gewindetyp: ST-Gewinde
More information on : www.ejot.de
Applications :
Fixing reinforced steel up to 3.0 mm in PVC windows also with inserted spacer bars
Properties :
With long drill point for a broad application range
Roll-sorted quality for automated fastening
Case-hardened steel
Technical specifications :
Head diameter: 7.5 mm
Drive: cross recess PH 2
Thread type: ST thread
More information on : www.ejot.de
Applications :
For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement
Mounting of fittings
Properties :
Burglary-resistant (RC2)
Roll-sorted quality for automated fastening
Case-hardened steel
Technical specifications :
Head diameter: 7.5 mm
Drive: cross recess PH 2 T
hread type: ST thread
More information on : www.ejot.de
Applications :
Fixing reinforced steel up to 3.0 mm in PVC windows with inserted spacer bars
Mounting of fittings
Properties :
Roll-sorted quality for automated fastening
Case-hardened steel
Technical specifications :
Head diameter: 7.5 mm
Drive: cross recess PH 2
Thread type: ST thread
More information on : www.ejot.de