Samobušeći vijci

Applications :
Fastening profiled steel sheet to 2 mm steel substructure Side lap stitching of profiled steel sheet Suitable for installation with the EJOFAST® JF screwdriver        

Properties :
Case-hardened steel, zinc-plated        

Technical specifications :
Drill capacity tI + tII: 1.5 + 2.0 mm A/F8 hexagon drive        

More information on : www.ejot.de

Applications :
Fastening profiled steel sheet to 1.5–5 mm steel substructure Fastening profiled aluminium sheet and sandwich panels to 1.5–5 mm steel or aluminium substructure        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII: 1.0 + 5.0 mm Drive: Hexagon AF8 Ø screw: 5.5 mm        

More information on : www.ejot.de

Applications :
Fastening profiled steel sheet to 1.5–5 mm steel substructure        

Properties :
Case-hardened steel, zinc-plated Steel sealing washer, zinc-plated Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII: 1.0 + 5.0 mm Drive: Hexagon AF8 Max. tightening torque (screws without sealing washer): 7.0 Nm        

More information on : www.ejot.de

Applications :
Side lap stitching of profiled steel sheet        

Properties :
Case-hardened, zinc-plated steel with innovative screw point geometry With free spin zone under screw head for side lap stitching Non-skid application Fastening without swarf Suitable for installation with tje EJOFAST® JF screwdriver        

Technical specifications :
Drilling capacity tI + tII: 0.88 + 0.88 mm Head geometry: Hexagon head Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
To form floating and fixed points on substructures of rear ventilated facades Fastening pre-drilled stainless steel or aluminium wall brackets to aluminium support profiles For component assemblies from 3.1–5.0 mm (component I + component II)        

Properties :
Drilling capacity: 2.0 mm Drive: hexagon A/F 8 Flange head: Ø 13 mm Material: A2 stainless steel Length non-threaded part: 5.0 mm        

Technical specifications :
Drilling capacity: 2.0 mm Drive: Hexagon AF8 Flange head: Ø 13 mm Material: A2 stainless steel Length non-threaded part: 5.0 mm        

More information on : www.ejot.de

Applications :
Fastening facade panels to aluminium substructure ≤ 3 mm        

Properties :
A2 stainless steel Countersunk head with flange        

Technical specifications :
Drilling capacity tI + tII: 3.0 mm Drive: Hexalobular TORX® T25        

More information on : www.ejot.de

Anwendungen :
Verschraubung von Stahlwellprofilblechen auf Stahlunterkonstruktionen 1,5–5 mm Verschraubung von Aluminiumwellprofilblechen auf Aluminium- oder Stahlunterkonstruktionen 1,5–5 mm        

Eigenschaften :
Edelstahl A2 mit gehärteter Stahl-Bohrspitze Dichtscheibe aus Edelstahl Dichtscheibe unverlierbar vormontiert        

Technische Daten :
Bohrkapazität tI + tII: 1,0 + 5,0 mm Antrieb: Innensechsrund TORX® T25 Einschraubdrehzahl: max. 1300 1/min        

Weitere Informationen unter: www.ejot.de

Applications :
Side lap stitching of profiled steel/aluminium sheet and sandwich panel Suitable for installation with the EJOFAST® JF screwdriver        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under screw head for side lap stitching        

Technical specifications :
Drilling capacity tI + tII: 1.0 + 1.0 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
For fixing profiled steel sheet to 4–12 mm steel substructure        

Properties :
Case-hardened steel Climadur coated - high-quality coating to improve corrosion protection (15 Kesternich cycles, DIN 50018, 1997) Steel sealing washer, zinc-plated Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII : 1.0 + 12.0 mm / 2.0 + 10.0 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening profiled steel sheet to 2–5 mm steel substructure        

Properties :
Case-hardened steel, zinc-plated Steel sealing washer, zinc-plated Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII: 1.5 + 5.0 mm Drive: Hexagon AF 3/8" Max. tightening torque (screws without sealing washer): 7.0 Nm        

More information on : www.ejot.de

Applications :
Fastening profiled steel and aluminium sheet and sandwich panels 4–10 mm steel substructure Fastening profiled aluminium sheet and sandwich panels 4–12 mm aluminium substructre        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII: 1.0 + 12.0 mm / 2.0 + 10.0 mm Drive: Hexagon AF8 Ø screw: 5.5 mm        

More information on : www.ejot.de

Applications :
Fastening profiled steel and aluminium sheet, sandwich panels and roofing sheet to timber substructure        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII: 2.0 mm Drive: Hexagon AF8 Ø screw: 6.5 mm        

More information on : www.ejot.de

Applications :
Fastening profiled steel sheet to 4 – 16 mm steel substructure        

Properties :
Case-hardened steel High-grade coating to improve the corrosion protection (15 Kesternich cycles, DIN 50018, 1997) Steel sealing washer, zinc-plated Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII: 2.0 + 16.0 mm Drive: Hexagon A/F8 Installation rotation speed: max. 1300 rpm        

More information on : www.ejot.de

Applications :
Side lap stitching of profiled steel and aluminium sheet Fastening profiled steel and aluminium sheet to cassette system walls        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under the screw head for side lap stitching        

Technical specifications :
Drilling capacity tI + tII: 1.5 + 2.0 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening sandwich panels to 3–12 mm steel substructure        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under the screw head High thread        

Technical specifications :
Drive: Hexagon AF8 Ø screw: 5.5 mm Ø high thread: 6.3 mm        

More information on : www.ejot.de

Applications :
Fastening sandwich panels to 1.5–5 mm steel substructures        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under the screw head High thread        

Technical specifications :
Drive: Hexagon AF8 Ø screw: 5.5 mm Ø high thread: 6.3 mm        

More information on : www.ejot.de

Applications :
Fastening sandwich panels to timber substructure        

Properties :
A2 stainless steel with innovative point geometry Stainless steel sealing washer Pre-assembled sealing washer Precise positioning Fastening without swarf and without pre-drilling Excellent clamping properties        

Technical specifications :
Drive: Hexagon AF8 Ø screw: 6.8 mm        

More information on : www.ejot.de

Applications :
Fastening components and brackets to thin-walled metal profiles for photovoltaic installations:   Fastening trapezoidal sheet flashings, clips for fixing standing seam systems or pre-punched retainers to thin-walled steel substructures (e.g. profiled sheets) Fixing wind deflector sheets to profiled elements        

Properties :
A2 stainless steel with innovative point geometry Stainless steel sealing washer Pre-assembled sealing washer Precise positioning Fastening without swarf and without pre-drilling Excellent clamping properties        

Technical specifications :
Drilling capacity tI + tII: 1.0 + 1.0 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
For the efficient fixing of steel air ducts        

Properties :
Fastening without swarf Swarf does not need to be cleaned from the ventilation ducts Case-hardened steel Non-skid application        

Technical specifications :
Drilling capacity tI + tII: 0.75 + 0.75 mm Drive: Hexagon AF7 Installation rotation speed: min. 400 rpm        

More information on : www.ejot.de

Applications :
For fixing facade panels to 1.0-2.0 mm aluminium substructures without swarfs Can be combined with LT fixed and floating point sleeves Note Please note the respective approval of the facade panel and the assembly instructions of the manufacturer.        

Properties :
A2 stainless steel with hardened steel drill point Pan head Benefits To cover slotted holes and large pre-drill diameters Also available in RAL lacquering Flat screw head for aesthetic facade design Fastening without swarf        

Technical specifications :
Drilling capacity (tI pre-drilled) tII: 2.0 mm Drive: Hexalobular drive T25 Head diameter: 16 mm Head height: 2.0 mm        

More information on : www.ejot.de

Applications :
Fastening components and brackets to thin-walled metal profiles for photovoltaic installations: Fastening trapezoidal sheet flashings, clips for fixing standing seam systems or pre-punched retainers to thin-walled steel substructures (e.g. profiled sheets) Fixing wind deflector sheets to profiled elements        

Properties :
A2 stainless steel with innovative point geometry Stainless steel sealing washer Pre-assembled sealing washer Precise positioning Fastening without swarfs and without pre-drilling Excellent clamping properties        

Technical specifications :
Drill capacity tI + tII: 1.0 + 1.0 mm Drive: hexalobular T25        

More information on : www.ejot.de

Applications :
Side lap stitching of profiled steel/aluminium sheet and sandwich panel Suitable for installation with the EJOFAST® JF screwdriver        

Properties :
A2 stainless steel with innovative point geometry Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under screw head for side lap stitching Non-skid application Fastening without swarf        

Technical specifications :
Drilling capacity tI + tII: 0.88 + 0.88 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Side lap stitching of profiled steel/aluminium sheet and sandwich panel Suitable for installation with the EJOFAST® JF screwdriver        

Properties :
A2 stainless steel with innovative point geometry Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under screw head for side lap stitching Non-skid application Fastening without swarf        

Technical specifications :
Drilling capacity tI + tII: 0.88 + 0.88 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Anwendungen :
Zur Befestigung von Fassadenplatten auf Aluminium- und Stahlunterkonstruktionen 1,5-2,5 mm Kombinierbar mit LT-Fest- und Gleitpunkthülsen Hinweis Bitte beachten Sie die jeweilige Zulassung der Fassadenplatte sowie die Montagevorschriften des Herstellers.        

Eigenschaften :
Edelstahl A2 mit gehärteter Stahl-Bohrspitze Linsenkopf Vorteile Abdeckung von Langlöchern und großen Vorbohrdurchmessern Auch in RAL-Lackierung erhältlich Ästhetische Fassadengestaltung durch sehr flachen Schraubenkopf Taumelfreie Verschraubung durch Verwendung des LT-Tools        

Technische Daten :
Bohrkapazität (tI vorgelocht) tII: 1,5 - 2,5 mm Antrieb: Innensechsrund T25 Kopfdurchmesser: 16 mm Kopfhöhe: 2 mm        

Weitere Informationen unter: www.ejot.de