Applications :
Installation of metal components
Plastic anchors for multiple use in concrete and masonry for non-structural applications
Suitable for the structural fastening of wall cupboards, cladding, metal angle pieces
Note
Please note the European Technical Approval ETA-10/0305 in your planning and in the processing of the products. Further information about parameters and loads can be found
in the approval.
Properties :
Anchor with an embedment depth of 40 mm in concrete
Two installation depths (embedment in masonry 50 mm)
Very short expansion part, for short installation times
Optimal expanding part due to radial expansion
Very high bending moment
Cr VI-free coating of the screw
Product identification through different sleeve colours
double safety lock against torsion for secure installation
Technical specifications :
Characteristic values
Hole depth in concrete h1.1: ≥ 50 mm
Effective embedment depth in concrete hnom,1: ≥ 40 mm
Hole depth in masonry h1.2: ≥ 60 mm
Effective embedment depth in masonry hnom,2: ≥ 50 mm
Drill-hole diameter d0: 10 mm
Hole diameter of construction part to be installed df:Ø 10.5 mm
Drive: hexalobular / TORX® T40
Characteristic loads
Tensile load NRk,p in concrete C12/15
Temperature range 30 °C / 50 °C: 4.50 kN
Temperature range 50 °C / 80 °C: 4.00 kN
FRk Brick Mz 20-1.8, NF: 2.50 kN
FRk Solid lime sand brick KS 36, NF: 4.00 kN
FRk Solid lime sand brick KS 20, 8 DF: 4.50 kN
Transverse load VRk,s in concrete C12/15 at hnom,1 = 40 mm
Anchor with steel screw: 7.93 kN
Anchor with stainless steel screw A4: 9.12 kN
Transverse load VRk,s at hnom,2 = 50 mm
Anchor with steel screw: 11.09 kN
Anchor with stainless steel screw A4: 12.94 kN
Bending moment MRk,s at hnom,1 =40 mm
Anchor with steel screw: 13.80 Nm
Anchor with stainless steel screw A4: 16.09 Nm
Side load MRk,s at hnom,2 = 50 mm
More information on : www.ejot.de
