Vijci za proizvodnju stolarije

Applications :
Transom fastening Direct installation into timber and PVC

Properties :
Partial Thread Case-hardened steel

Technical specifications :
Head diameter: 11.5 mm Drive: T30 Note Check pre-drilling, when installing into hard wood

More information on : www.ejot.de

Applications :
Fastening window handles

Properties :
With dog point Quality grade 4.8

Technical specifications :
Head diameter: 9.0 mm Drive: Cross recess PH 2 Thread type: metric

More information on : www.ejot.de

Applications :
Clamping of: roller-shutter profiles drip sills

Technical specifications :
Drive: cross recess PH 2 Thread type: double-start thread

More information on : www.ejot.de

Applications :
For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement

Properties :
Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Kopfdurchmesser: 7,5 mm Antrieb: Kreuzschlitz PH 2 Gewindetyp: ST-Gewinde

More information on : www.ejot.de

Applications :
Fixing reinforced steel up to 3.0 mm in PVC windows also with inserted spacer bars

Properties :
With long drill point for a broad application range Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: ST thread

More information on : www.ejot.de

Applications :
For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement Mounting of fittings

Properties :
Burglary-resistant (RC2) Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 T hread type: ST thread

More information on : www.ejot.de

Applications :
Fixing reinforced steel up to 3.0 mm in PVC windows with inserted spacer bars Mounting of fittings

Properties :
Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: ST thread

More information on : www.ejot.de

Applications :
Fixing reinforced steel up to 3.0 mm in PVC windows with inserted spacer bars Mounting of fittings

Properties :
Roll-sorted quality for automated fastening Under-head serrations for easy countersinking of the screw head in PVC Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: ST thread

More information on : www.ejot.de

Applications :
For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement Mounting of fittings

Properties :
Burglary-resistant (RC2) Roll-sorted quality for automated fastening Under-head serrations for easy countersinking of the screw head in PVC Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: ST thread

More information on : www.ejot.de

Applications :
For fixing metal core and fittings to thickwalled and multi-ply PVC profiles and steel or aluminium reinforcements up to 4 mm thick.

Properties :
One type of screw for up to three applications Reduction of application errors Reliable fastening process Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Drilling capacity up to 4.0 mm Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: special thread

More information on : www.ejot.de

Applications :
Fixing 1.5 - 3.5 mm reinforced steel in reinforced or multi-ply PVC windows Mounting of fittings

Properties :
The fine thread pitch of the metric thread prevents a forced feed in thick-walled PVC or in window profiles with multiple cavities Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: metric

More information on : www.ejot.de

Applications :
Fixing 1.5 - 3.5 mm reinforced steel in reinforced or multi-ply PVC windows Mounting of fittings

Properties :
The fine thread pitch of the metric thread prevents a forced feed in thick-walled PVC or in window profiles with multiple cavities Roll-sorted quality for automated fastening Under-head facets for easy countersinking of the head in PVC Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: metric

More information on : www.ejot.de

Applications :
Fixing 1.5 - 3.5 mm reinforced steel in reinforced or multi-ply PVC windows

Properties :
The fine thread pitch of the metric thread prevents a forced feed in thick-walled PVC or in window profiles with multiple cavities Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 8.0 mm Drive: cross recess PH 2 Thread type: metric

More information on : www.ejot.de

Applications :
For increased loads For reliable replacement of stripped fitting screws

Properties :
With DSK point for precise and no run-out fastening in PVC With HT thread - Head diameter identical with fitting screw type S (7,3 mm) Case-hardened steel

Technical specifications :
Head diameter: 7.3 mm Drive: cross recess PH 2 Thread type: HT thread

More information on : www.ejot.de

Applications :
Especially suited for fixing: tilt and turn fittings in regular and thin-walled PVC profiles and for automated fastening Also suited for fixing: locking plates, strips and bearings for reinforcing steel rods with pre-drilling (as specified)

Properties :
the classic screw for fittings, technically leading the way for no-compromises in quality for high installation safety even in thin-walled profiles with double-start thread and lean thread pitch for optimum stripping torques and pull-out values in PVC A2 stainless steel for high corrosion resistance

Technical specifications :
Head diameter: 7.3 mm Drive: Phillips PH 2 Thread type: double-start thread

More information on : www.ejot.de

Applications :
Fixing gear rack and baffle gear For narrow casement profiles

Properties :
The threadless area minimises: The friction at the joint of gear rack / baffle gear Permanent, easy opening and closing of the window is ensured Under-head serrations for increased safety against stripping Case-hardened steel

Technical specifications :
Head Diameter: 7.1 mm Drive: cross recess PH 2 Thread type: single-start screw thread

More information on : www.ejot.de

Applications :
Manual assembly of tilt and turn fittings with low rotation speed Fixing locking plates, strips and bearings in steel reinforcement with pre-drilling

Properties :
With double cutting edge and symmetrically arranged cutting surfaces Excellent alignment for precise and no runout fastening in PVC Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.3 mm Drive: cross recess PH 2 Thread type: double-start thread

More information on : www.ejot.de

Applications :
Fastening of tilt and turn fittings in regular and thin-walled PVC profiles and in steel or GRP inserts Fixing locking plates, strips and bearings

Properties :
Classic screw for fittings, technically leading, with double-start thread The optimum also in thin-walled profiles Optimum stripping torques and pull-out values in PVC Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.3 mm Drive: cross recess PH 2 Thread type: double-start thread

More information on : www.ejot.de

Applications :
Fixing gear rack and baffle gear

Properties :
The threadless area minimises: The friction at the joint of gear rack / baffle gear Permanent, easy opening and closing of the window is ensured Case-hardened steel

Technical specifications :
Head diameter: 7.3 mm Drive: cross recess PH 2 Thread type: double-start thread

More information on : www.ejot.de

Applications :
Fastening of tilt and turn fittings in PVC profiles and in steel or GRP inserts Fixing locking plates, strips and bearings

Properties :
Cost-effective screw for fittings with onestart thread Under-head serrations for increased safety against stripping Slightly curved head for flawless appearance even with bevelled installation Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head Diameter: 7.1 mm Drive: cross recess PH 2 Thread type: single-start screw thread

More information on : www.ejot.de

Applications :
For fixing tilt and turn fittings in wood Fixing locking plates and bearings etc.

Properties :
The special thread geometry and the wax coating ensure low installation torques and high stripping or loosening torques Immediate grip in the wood due to a perfectly formed cutting tip Edge distance and pre-drilling according to Eurocode 5 (former DIN 1052) Case-hardened steel

Technical specifications :
Head diameter: 7.0 mm Thread geometry: special thread, reinforced Point: cutting point

More information on : www.ejot.de