Mašine/Rezervni delovi/Alat

Applications :
Torque optimised cordless screwgun for fixing metal with screw diameters of up to 6.3 mm

Properties :
Powerful battery for over 150 fixings in sheet steel Electronic torque shut-off for precise results even without depth control Maintenance-free, brushless motor with a very high degree of efficiency Tested for over 500,000 single fixings  Over 1000 recharge cycles per battery pack Extremely low weight Optimum ergonomics with pistol handle for high contact pressure Powerful up to 30 Nm

Technical specifications :
Battery voltage: 18 V Load speed: 0-1500 rpm Idle speed: 0-1700 rpm Max. torque (hard/soft): 30/10 Nm Quick change chuck: 1/4“ Screws: Ø 6.3 mm Battery pack: X

More information on : www.ejot.de

Applications :
Handy slitting shears, suitable for bends for metals and non-metals

Properties :
Fast work progress due to excellent view of the cut through open cutting head Left and right curved cut, as well as distortion-free cutting possible with just one continuous chip QuickIN quick-change system for fast, key-free blade change without adjustment Excellent ergonomics and low weight Motor with outstanding performance and service life Cutting blade with excellent service life Cutting capacity with one battery charge 120 m Clean swarf removal prevents scratching on the work piece and injuries

Technical specifications :
Battery voltage: 14.4V Stroke rate : 2 000 - 3 500 rpm Cutting speed: 5 - 8 m/min Steel up to 400 N/mm²: 1.6 mm Steel up to 600 N/mm²: 1.2 mm Steel up to 800 N/mm²: 0.8 mm Nonferrous metal up to 250 N/mm²: 2.0 mm Cutting width: 5.0 mm Radius of the smallest curve: 90 (30)¹ mm Imersion diameter: 15 (8)¹ mm Battery pack: X ¹ with curve knife

More information on : www.ejot.de

Applications :
Compact nibbler suitable for bends for roof and facade construction Precise cuts in trapezoidal and corrugated sheets as well as profiles

Properties :
Cutting performance 40 m in 0.8 mm trapezoidal profiled sheet with one battery  1.5 m/min cutting speed for outstanding work progress  Variable cutting speed due to electronically adjustable number of strokes Short-term overlapping 2.6 mm  Optimum handling due to extremely small gear head  Light weight QuickIN quick change system of plate and die Rotating die for up to 30 % longer service life  In 45° steps variable by 360° adjustable cutting direction due to no-tool rotatable die-plate support Proven MultiMaster Motor with outstanding performance and service life Low operating costs. Die and die-plate are exchanged independently

Technical specifications :
Battery voltage: 18 V Stroke rate: 1 300 rpm Cutting speed: 1.5 m/min Weight without battery: 1.6 kg Steel up to 400 N/mm²: 1.6 mm Steel up to 600 N/mm²: 1.0 mm Steel up to 800 N/mm²: 0.7 mm Nonferrous metal up to 250 N/mm²: 2.5 mm Cutting line width: 5 mm Dipping Ø with die 24 mm: 22 mm Radius of the smallest curve (inside/outside): 0/35 mm Battery pack: X

More information on : www.ejot.de

Applications :
Universal nibbler for trapezoidal and sinusoidal sheet as well as profiles and sheet metal Up to 1.6 mm Included in delivery 1 ABLK 1.6 E in plastic tool case 1 rapid charger ALG 50 2 battery packs (Li-Ion) 1 die-plate carrier for trapezoidal and sinusoidal sheet 1 punch 1 die

Properties :
Cutting performance 30 m in 0.8 mm trapezoidal profiled sheet with one battery 2.3 m/min cutting speed for outstanding work progress Variable cutting speed due to electronically adjustable number of strokes Short-term overlapping 2.6 mm Optimum handling due to extremely small gear head Over 1,000 recharge cycles per battery pack Light weight of only 2.1 kg QuickIN quick change system Rotating die for up to 30 % longer service life In 45° steps variable by 360° adjustable cutting direction due to no-tool rotatable die-plate support Proven MultiMaster Motor with outstanding performance and service life Low operating costs. Die and die-plate are exchanged independently.

Technical specifications :
Battery voltage: 14.4 V Battery capacity: 3.0 Ah Stroke rate: 1300 rpm Cutting speed: 1.5 m/min Weight acc. to EPTA: 2.0 kg Steel up to 400 N/mm²: 1.6 mm Steel up to 600 N/mm²: 1.0 mm Steel up to 800 N²mm²: 0.7 mm Nonferrous metal up to 250 N/mm²: 2.5 mm Cutting line width: 5 mm Dipping Ø with die: 22 mm Radius of he smallest curve (inside/outside) 30/35 mm

More information on : www.ejot.de

Applications :
Powerful cordless screwgun Ligthweight and extremely high endurance (18V/4Ah)

Properties :
4-gear full metal gear unit Brushless FEIN PowerDrive motor with 30% higher degree of efficiency Lithium-Ion battery with FEIN SafetyCell Technology. A separate communication line protects battery and tools from overloading 3 years FEIN PLUS guarantee incl. battery and charger Removable full metal drill chuck / bit holder Electronic torque adjustment Motor and electronics are completely protected from dust 1 800 fixings with only one battery charge Fastens 10 x 400 mm screws without pre-drilling High torques up tp 90 Nm Hard-metal clamping jaws hold round drill shafts extremely reliable

Technical specifications :
Battery voltage: 18 V Motor: Brushless Gear: 4-gear Idle speed: 400 / 800 / 1 950 / 3 850 rpm Max. torque (hard/soft): 90/46 Nm Torque steps: 15 + 1 Drill chuck clamping range: 1.5 - 13 mm Screws: 10 x 400 mm Drill Ø timber: 50 mm Drill Ø steel: 13 mm Battery pack: X

More information on : www.ejot.de

More information on : www.ejot.de