Samobušeći vijci

Applications :
Fastening of tilt and turn fittings in PVC profiles and in steel or GRP inserts Fixing locking plates, strips and bearings

Properties :
Cost-effective screw for fittings with onestart thread Under-head serrations for increased safety against stripping Slightly curved head for flawless appearance even with bevelled installation Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head Diameter: 7.1 mm Drive: cross recess PH 2 Thread type: single-start screw thread

More information on : www.ejot.de

Applications :
For fixing tilt and turn fittings in wood Fixing locking plates and bearings etc.

Properties :
The special thread geometry and the wax coating ensure low installation torques and high stripping or loosening torques Immediate grip in the wood due to a perfectly formed cutting tip Edge distance and pre-drilling according to Eurocode 5 (former DIN 1052) Case-hardened steel

Technical specifications :
Head diameter: 7.0 mm Thread geometry: special thread, reinforced Point: cutting point

More information on : www.ejot.de

Applications :
Transom fastening Direct installation into timber and PVC

Properties :
Partial Thread Case-hardened steel

Technical specifications :
Head diameter: 11.5 mm Drive: T30 Note Check pre-drilling, when installing into hard wood

More information on : www.ejot.de

Applications :
Fastening window handles

Properties :
With dog point Quality grade 4.8

Technical specifications :
Head diameter: 9.0 mm Drive: Cross recess PH 2 Thread type: metric

More information on : www.ejot.de

Applications :
Side lap stitching of profiled steel/aluminium sheet and sandwich panel Suitable for installation with the EJOFAST® JF screwdriver        

Properties :
A2 stainless steel with innovative point geometry Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under screw head for side lap stitching Non-skid application Fastening without swarf        

Technical specifications :
Drilling capacity tI + tII: 0.88 + 0.88 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Side lap stitching of profiled steel/aluminium sheet and sandwich panel Suitable for installation with the EJOFAST® JF screwdriver        

Properties :
A2 stainless steel with innovative point geometry Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under screw head for side lap stitching Non-skid application Fastening without swarf        

Technical specifications :
Drilling capacity tI + tII: 0.88 + 0.88 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening profiled steel and aluminium sheet and sandwich panels 4–10 mm steel substructure Fastening profiled aluminium sheet and sandwich panels 4–12 mm aluminium substructre        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII: 1.0 + 12.0 mm / 2.0 + 10.0 mm Drive: Hexagon AF8 Ø screw: 5.5 mm        

More information on : www.ejot.de

Applications :
Side lap stitching of profiled steel and aluminium sheet Fastening profiled steel and aluminium sheet to cassette system walls        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under the screw head for side lap stitching        

Technical specifications :
Drilling capacity tI + tII: 1.5 + 2.0 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening profiled steel sheet to 1.5–5 mm steel substructure Fastening profiled aluminium sheet and sandwich panels to 1.5–5 mm steel or aluminium substructure        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII: 1.0 + 5.0 mm Drive: Hexagon AF8 Ø screw: 5.5 mm        

More information on : www.ejot.de

Applications :
Fastening profiled steel and aluminium sheets and sandwich panels to 4-10 mm steel substructure Fastening aluminium profiled sheets to 4-12 mm aluminium substructures        

Properties :
A4 stainless steel with hardened steel drill point Stainless steel sealing washer Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII: 2.0 + 10.0 mm Drive: Hexagon A/F8 Installation rotation speed: max. 1300 rpm        

More information on : www.ejot.de

Applications :
Side lap stitching of profiled steel and aluminium sheet Fastening profiled steel and aluminium sheet to cassette system walls        

Properties :
A4 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under the screw head for side lap stitching        

Technical specifications :
Drilling capacity tI + tII: 1.5 + 2.0 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Side lap stitching of profiled steel and aluminium sheet sheet Fastening profiled steel and aluminium sheet to cassette system walls        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under screw head for side lap stitching        

Technical specifications :
Drilling capacity tI + tII: 1.5 + 2.0 mm Drive: Hexalobular TORX® T25        

More information on : www.ejot.de

Applications :
Fastening corrugated fibre cement sheet 177/51 to steel substructure 5–12 mm Note For the dimensioning and the use of fastening materials please note the manufacturer's instructions for use as well as the national approvals.        

Properties :
Case-hardened steel Climadur coated-high-quality coating to improve corrosion protection (15 Kesternich cycles, DIN 50018, 1997) Pre-assembled FZD sealing washer A2 stainless steel washer Screw wings save additional drilling into the corrugated slabs Reduced forcing tension        

Technical specifications :
Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening corrugated fibre cement sheet 177/51 to steel substructure 1.5–6 mm Note For the dimensioning and the use of fastening materials please note the manufacturer's instructions for use as well as the national approvals.        

Properties :
Case-hardened steel Climadur coated-high-quality coating to improve corrosion protection (15 Kesternich cycles, DIN 50018, 1997) Pre-assembled FZD sealing washer A2 stainless steel washer Screw wings save additional drilling into the corrugated slabseduced forcing tension Reduced forcing tension        

Technical specifications :
Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening corrugated fibre cement sheet to timber substructure Note Suitable for corrugation 5 when covering with corrugated fibre cement sheet 177/51 to timber substructure without insulation. For the dimensioning and the use of fastening materials please note the manufacturer's instructions for use as well as the national approvals.        

Properties :
Case-hardened steel, hot-dip zinc-plated Pre-assembled FZD sealing washer A2 stainless steel washer Screw wings save additional drilling into the corrugated slabs Reduced forcing tension        

Technical specifications :
Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening fibre cement corrugated sheets to timber substructures Note Suitable for covering with fibre cement corrugated sheet profile 177/51 P5 and P6 to timber substructure without insulation. For the dimensioning and the use of fastening materials please note the manufacturer's instructions for use as well as the national approvals.        

Properties :
A2 stainless steel Pre-assembled FZD sealing washer A2 stainless steel washer Screw wings save additional drilling into the corrugated slabs Reduced forcing tension        

Technical specifications :
Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Side lap stitching of profiled steel sheet        

Properties :
Case-hardened, zinc-plated steel with innovative screw point geometry With free spin zone under screw head for side lap stitching Non-skid application Fastening without swarf Suitable for installation with tje EJOFAST® JF screwdriver        

Technical specifications :
Drilling capacity tI + tII: 0.88 + 0.88 mm Head geometry: Hexagon head Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
For fixing profiled steel sheet to 4–12 mm steel substructure        

Properties :
Case-hardened steel Climadur coated - high-quality coating to improve corrosion protection (15 Kesternich cycles, DIN 50018, 1997) Steel sealing washer, zinc-plated Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII : 1.0 + 12.0 mm / 2.0 + 10.0 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Side lap stitching of profiled steel sheet        

Properties :
Case-hardened steel, zinc-plated With free spin zone under screw head for side lap stitching        

Technical specifications :
Drill capacity tI + tII: 1.0 + 1.0 mm Head geometry: Hexagon head Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening sandwich panels to 3–12 mm steel substructure        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under the screw head High thread        

Technical specifications :
Drive: Hexagon AF8 Ø screw: 5.5 mm Ø high thread: 6.3 mm        

More information on : www.ejot.de

Applications :
Fastening sandwich panels to 1.5–5 mm steel substructures        

Properties :
A2 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under the screw head High thread        

Technical specifications :
Drive: Hexagon AF8 Ø screw: 5.5 mm Ø high thread: 6.3 mm        

More information on : www.ejot.de

Applications :
Fastening profiled steel sheet to 1.5–5 mm steel substructure        

Properties :
Case-hardened steel, zinc-plated Steel sealing washer, zinc-plated Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII: 1.0 + 5.0 mm Drive: Hexagon AF8 Max. tightening torque (screws without sealing washer): 7.0 Nm        

More information on : www.ejot.de

Applications :
Fixing standing seam systems (clips) to 0.55–1.50 mm steel substructure Fixing standing seam systems (clips) to 0.8–1.5 mm aluminium substructure or timber substructure Embedment depth acc. to the approval 18–24 mm        

Properties :
A2 stainless steel with hardened drill point Under-head serrations to increase the installation reliability Special thread for thin-walled components High stripping torque Installation without special tools        

Technical specifications :
Drilling capacity tI + tII: 1.00 + 1.00 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
For fixing wooden parts onto thin-walled steel / aluminium substrate        

Properties :
Case-hardened steel Climadur coated - high-quality coating to improve corrosion protection (15 Kesternich cycles, DIN 50018, 1997)        

Technical specifications :
Drilling capacity tI + tII: 1.0 + 1.0 mm Drive: Hexalobular TORX® T25        

More information on : www.ejot.de