Samobušeći vijci

Applications :
Fastening aluminium corrugated profile sheet to aluminium substructure ≤ 3 mm Fastening facade panels to aluminium substructure        

Properties :
A2 stainless steel        

Technical specifications :
Drilling capacity tI + tII: 1.0 + 3.0 mm Drive: Hexalobular TORX® T25        

More information on : www.ejot.de

Applications :
Fastening aluminium corrugated profile sheet to aluminium substructure ≤ 3 mm Fastening facade panels to aluminium substructure        

Properties :
A2 stainless steel        

Technical specifications :
Drill capacity tI + tII: 1.0 + 3.0 mm Drive: Hexalobular TORX® T25        

More information on : www.ejot.de

Applications :
Fastening fibre cement corrugated sheets to timber substructures Note Suitable for covering with fibre cement corrugated sheet profile 177/51 P5 and P6 to timber substructure without insulation. For the dimensioning and the use of fastening materials please note the manufacturer's instructions for use as well as the national approvals.        

Properties :
A2 stainless steel Pre-assembled FZD sealing washer A2 stainless steel washer Screw wings save additional drilling into the corrugated slabs Reduced forcing tension        

Technical specifications :
Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening facade panels to aluminium substructure ≤ 2 mm Note Please note the respective approval of the facade panel and the assembly instructions of the manufacturer.        

Properties :
A2 stainless steel Pan head        

Technical specifications :
Drilling capacity (tI pre-drilled) + tII: 1.5–2.0 mm Drive: Hexalobular T25 Head diameter: 16 mm Head height: 2 mm Length non-threaded part: 6.0 mm        

More information on : www.ejot.de

Applications :
Fastening facade panels to timber and aluminium substructure Note Please note the respective approval of the facade panel and the assembly instructions of the manufacturer.        

Properties :
A2 stainless steel Pan head        

Technical specifications :
Drilling capacity (tI pre-drilled) + tII: 1.5–2.0 mm Drive: Hexalobular T25 Head diameter: 16 mm Head height: 2 mm Length non-threaded part: 6.0 mm        

More information on : www.ejot.de

Anwendungen :
Zur Befestigung von Fassadenplatten auf Aluminiumunterkonstruktionen 1,5-3,0 mm Kombinierbar mit LT-Fest- und Gleitpunkthülsen Hinweis Bitte beachten Sie die jeweilige Zulassung der Fassadenplatte sowie die Montagevorschriften des Herstellers.        

Eigenschaften :
Edelstahl A2 Linsenkopf Vorteile Abdeckung von Langlöchern und großen Vorbohrdurchmessern Auch in RAL-Lackierung erhältlich Ästhetische Fassadengestaltung durch sehr flachen Schraubenkopf Taumelfreie Verschraubung durch Verwendung des LT-Tools        

Technische Daten :
Bohrkapazität (tI vorgelocht) tII: 1,5–30 mm Antrieb: Innensechsrund T25 Kopfdurchmesser: 16 mm Kopfhöhe: 2 mm        

Weitere Informationen unter: www.ejot.de

Applications :
Fastening timber laths to aluminium substructure ≤ 2 mm        

Properties :
A2 stainless steel Countersunk head with milling ribs        

Technical specifications :
Drilling capacity tI + tII: 2.0 mm Drive: Hexalobular TORX® T25        

More information on : www.ejot.de

Applications :
Fastening facade panels to aluminium substructure ≤ 3 mm        

Properties :
A2 stainless steel Countersunk head with flange        

Technical specifications :
Drilling capacity tI + tII: 3.0 mm Drive: Hexalobular TORX® T25        

More information on : www.ejot.de

Anwendungen :
Zur konstruktiven Befestigung von ALUCOBOND®-Platten auf Aluminiumunterkonstruktionen 2,0 mm        

Eigenschaften :
Edelstahl A2 Vorteile Befestiger durchbohrt ALUCOBOND-Platte und Aluminium Unterkonstruktion Gewindefreier Teil unter dem Schraubenkopf ermöglicht ein gewolltes Weiterdrehen des Schraubenkopfes nach Kopfauflage Schneidring unter dem Schraubkopf schneidet Schutzfolie auf der Fassadenplatte ein Schutzfolie kann nach erfolgter Montage von der ALUCOBOND-Platte rückstandslos entfernt werden Auch in lackierter Ausführung erhältlich          

Technische Daten :
Bohrkapazität tI + tII: 2,0 mm Antrieb Innensechsrund: T25        

Weitere Informationen unter: www.ejot.de

Applications :
Fastening profiled steel and aluminium sheets and sandwich panels to 4-10 mm steel substructure Fastening aluminium profiled sheets to 4-12 mm aluminium substructures        

Properties :
A4 stainless steel with hardened steel drill point Stainless steel sealing washer Pre-assembled sealing washer        

Technical specifications :
Drilling capacity tI + tII: 2.0 + 10.0 mm Drive: Hexagon A/F8 Installation rotation speed: max. 1300 rpm        

More information on : www.ejot.de

Anwendungen :
Zur Ausbildung von Gleit- und Festpunkten bei Unterkonstruktionen in der VHF Zur Verbindung von vorgelochten Edelstahl oder Aluminiumwandhaltern auf Aluminiumtragprofilen        

Eigenschaften :
Edelstahl A4 mit gehärteter Stahl-Bohrspitze Gleitscheibe mit Pufferzone zwischen Schraubenkopf verhindert zu starke Vorspannkraft der Verbindung Gleitscheibe unverlierbar vormontiert          

Technische Daten :
Bohrkapazität: 3,0 mm Antrieb: Sechskant SW8        

Weitere Informationen unter: www.ejot.de

Applications :
Side lap stitching of profiled steel and aluminium sheet Fastening profiled steel and aluminium sheet to cassette system walls        

Properties :
A4 stainless steel with hardened drill point Stainless steel sealing washer Pre-assembled sealing washer With free spin zone under the screw head for side lap stitching        

Technical specifications :
Drilling capacity tI + tII: 1.5 + 2.0 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening profiled steel sheets to 1.5 – 5 mm steel substructure Fastening profiled aluminium sheets and sandwich panels to 1.5-5 mm steel substructure        

Technical specifications :
Drilling capacity tI + tII: 2.0 + 4.0 mm  Drive: Hexagon A/F8 Installation rotation speed: max. 1300 rpm        

More information on : www.ejot.de

Applications :
To form floating and fixed points on substructures of rear ventilated facades Fastening pre-drilled stainless steel or aluminium wall brackets to aluminium support profiles For component assemblies from 3.1–5.0 mm (component I + component II)        

Technical specifications :
Drilling capacity: 2.0 m Drive: Hexagon AF8 Flange head: Ø 13 mm Material: A4 stainless steel Length non-threaded part: 5.0 mm        

More information on : www.ejot.de

Applications :
To form floating and fixed points on aluminium substructures of rear ventilated facades Fastening pre-drilled stainless steel or aluminium wall brackets to aluminium support profiles For component assemblies from 6.0–7.0 mm (component I + component II)        

Technical specifications :
Drilling capacity: 2.0 mm Drive: Hexagon AF8 Flange head: Ø 13 mm Material: A4 stainless steel Length non-threaded part: 7.0 mm        

More information on : www.ejot.de

Applications :
Fastening aluminium profiles to aluminium substructure ≤4 mm        

Properties :
A4 stainless steel        

Technical specifications :
Drilling capacity tI + tII: 2.0 + 4.0 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Anwendungen :
Zur Längsstoßverbindung von Kunststoffprofiltafeln Verbindung von Kunststoffprofiltafeln mit anderen Bauteilen, für die ein Tragfähigkeitsnachweis nicht erforderlich ist, bei denen unterschiedliche Querkräfte infolge von Temperaturausdehnung zu erwarten sind. Hinweis Die Durchführung einer Dichtheitsprüfung wird empfohlen.        

Eigenschaften :
Schraube aus Edelstahl A2 Dichtscheibe aus Edelstahl Dichtscheibe unverlierbar vormontiert EPDM-Dichthülse mit Gewindeeinsatz aus Messing        

Technische Daten :
Gewindeform Schraube: M5 Anzugsmoment: 1,5 Nm Antrieb: Sechskant SW8        

Weitere Informationen unter: www.ejot.de

Applications :
Side lap stitching of profiled steel sheet        

Properties :
Case-hardened, zinc-plated steel with innovative screw point geometry With free spin zone under screw head for side lap stitching Non-skid application Fastening without swarf Suitable for installation with tje EJOFAST® JF screwdriver        

Technical specifications :
Drilling capacity tI + tII: 0.88 + 0.88 mm Head geometry: Hexagon head Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement

Properties :
Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Kopfdurchmesser: 7,5 mm Antrieb: Kreuzschlitz PH 2 Gewindetyp: ST-Gewinde

More information on : www.ejot.de

Applications :
Fixing reinforced steel up to 3.0 mm in PVC windows also with inserted spacer bars

Properties :
With long drill point for a broad application range Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: ST thread

More information on : www.ejot.de

Applications :
For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement Mounting of fittings

Properties :
Burglary-resistant (RC2) Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 T hread type: ST thread

More information on : www.ejot.de

Applications :
Fixing reinforced steel up to 3.0 mm in PVC windows with inserted spacer bars Mounting of fittings

Properties :
Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: ST thread

More information on : www.ejot.de

Applications :
Fixing reinforced steel up to 3.0 mm in PVC windows with inserted spacer bars Mounting of fittings

Properties :
Roll-sorted quality for automated fastening Under-head serrations for easy countersinking of the screw head in PVC Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: ST thread

More information on : www.ejot.de

Applications :
For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement Mounting of fittings

Properties :
Burglary-resistant (RC2) Roll-sorted quality for automated fastening Under-head serrations for easy countersinking of the screw head in PVC Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: ST thread

More information on : www.ejot.de