Alat i dodatna oprema za sisteme termoizolacije

Applications :
Used in conjunction with fasteners and anchors depending of inner diameter

Properties :
Polyamide disc washer

Technical specifications :
60mm diameter 8mm inner diameter hole

More information on : www.ejot.de

Applications :
For connecting profile rails Simply clip onto the rail elements to be connected Facilitates the precise adjustment of base rails Available length: 30 mm each and 1,150 mm

More information on : www.ejot.de

Applications :
Special step drill For penetration of existing thick renders and for non-standard applications For use in combination with EJOT drillX

Technical specifications :
Total length: 210 mm Use length: 150 mm Drill diameter: 8 mm / 19 mm

More information on : www.ejot.de

Applications :
Specifically matched combination washer for ejotherm STR U 2G for countersunk installation into all mineral wool insulation boards WAP-zg (type WV)   ejotherm VT 2G continues to promote the countersunk installation acc. to STR principle in all mineral wool insulation boards with a low tensil strength WAP-zg (type WV) For homogeneous surfaces and even rendering With European Technical Approval (ETA)        

Properties :
Low point thermal transmission (Chi value 0.001 W/K) Reduced anchor marks No additional tool required Permanent contact pressure Anchor locates easily in the washer with a firm "click" 100% setting control        

Technical specifications :
Washer diameter: 110 mm German DIBt approval: Z-21.2-1769 European Technical Approval: ETA-04-0023  The quantity of anchors can be found in the mineral wool approvals for washers ≥90 mm..        

More information on : www.ejot.de

Applications :
For fastening External Thermal Insulation Composite Systems with problematic substrates To combine with EJOT SDF-S plus 8UB Available in two lengths With European Technical Assessment For surface fixed installation Can be combined with additional washers EJOT SBL 140 plus and EJOT VT 90 Washer diameter: 60 mm Special sealing plug made of polystyrene (EPS) included in the scope of supply

Technical specifications :
Shaft length EJOT TE 60/50: 50 mm Shaft length EJOT TE 60/110: 110 mm Washer Diameter: 60 mm Screw drive: TORX T30 Drill hole depth h1: ≥ 80 mm Embedment depth hef: ≥ 70 mm Point thermal transmission Χ EJOT TE 60/50 with insulation thicknesses 60 - 180 mm: 0.002 W/K Point thermal transmission Χ EJOT TE 60/110 with insulation thicknesses 120 - 150 mm: 0.00 W/K Point thermal transmission Χ EJOT TE 60/110 with insulation thicknesses 150 - 240 mm: 0.001 W/K European Technical Assessment: ETA-04/0064

More information on : www.ejot.de

Applications :
Fastening of External Thermal Insulation Systems on problematic substrates To combine with EJOT SDF-S plus 8UB

Technical specifications :
Technical data EJOT TE 60/50 and 60/110 in combinaton with EJOT SDF-S plus 8UB Shaft length EJOT TE 60/50: 50 mm Shaft length EJOT TE 60/110: 110 mm Washer diameter: 60 mm Screw drive: TORX T30 Drill hole depth h1 ≥ : 80 mm Embedment depth hef ≥ : 70 mm Point thermal transmission χ TE 60/50: 0.002 W/K Point thermal transmission χ TE 60/110 with insulation thickness 120-150 mm: 0.000 W/K Point thermal transmission χ TE 60/110 with insulation thickness 150-240: 0.001 W/K European Technical Approval ETA-04/0064

More information on : www.ejot.de