Pipe Flashings

Applications :
A reliable seal between pipe and pipe flashing For diameters from 150 mm onwards Order note Universal hose clamp consisting of tightener and universal cable tie. Length of universal cable tie ≥ pipe circumference + 50 mm.        

Technical specifications :
Tip back the hinged screw in the tightener, insert one end of the universal cable tie through the clamp lock and twist about 15 mm Place universal fastener strap around Dektite®, insert through the tightener and tighten by hand. Hinge the screw inwards and tighten as far as possible with a screwdriver.        

More information on : www.ejot.de

Applications :
For sealing the pipe flashing

Properties :
EJOPLAST is a single-component universal sealant based on polycarboxylic acid copolymeric base. EJOPLAST can be cleaned with standard detergents, but not with solvents. EJOPLAST hardens through the evaporation of solvents and is impervious to water from the beginning because it forms an immediate skin. The surface is adhesive-free after 20-30 minutes (depending on temperature), likewise immediately after contact with water (e.g. by planing). EJOPLAST adheres to all conventional materials such as steel, aluminium, copper, brass, glass, wood, ceramic, bitumen, concrete, masonry, plaster, plexiglas, tiles, roof tiles, polyester, roofing paper, etc. Smooth, non-porous substructures may even be wet, while porous surface should be dry.

More information on : www.ejot.de

Applications :
A reliable seal between pipe and pipe flashing        

Properties :
Pierce the marking for the clamp or cable tie at the joint, pull through, place around the Dektite® Retrofit and close.        

More information on : www.ejot.de

Applications :
For waterproofing pipes on corrugated metal or fibre cement roofs For subsequent waterproofing of pipes Made of silicone for higher temperatures up to +250 °C upon request Note Use Bulbtite rivets for corrugated fibre-cement sheets.

Properties :
Perfect seal on roof and facade No interference of thermal elongation of pipes No fatigue fractures Ideal for repairs of existing pipe systems

Technical specifications :
Included in delivery 1 pipe flashing 1 cartridge of EJOPLAST joint sealant 1 EJOT® self-drilling screw set / optional EJOT® Bulbtite set 1 clips set

More information on : www.ejot.de

Applications :
For waterproofing pipes on corrugated metal and fibre cement roofs no bonding! Made of silicone for higher temperatures up to +250 °C upon request Note Use Bulbtite rivets for corrugated fibre-cement sheets.

Properties :
Non-absorbent, closed cell sealing surface Seals under compression even on wet surfaces Seals without use of a joint sealant No interference of thermal elongation of pipes No fatigue fractures

Technical specifications :
1 Pipe flashing 1 EJOT® self-drilling screw set – optional EJOT® Bulbtite set

More information on : www.ejot.de

Applications :
For subsequent waterproofing of pipes in places difficult to access Ideal for repairs of existing pipe systems Made of silicone for higher temperatures up to +250 °C upon request Note Use Bulbtite rivets for corrugated fibre-cement sheets.

Properties :
Eeasy to lock

Technical specifications :
1 Pipe flashing 1 cartridge of EJOPLAST joint sealant 1 EJOT® self-drilling screw set / optional EJOT® Bulbtite set

More information on : www.ejot.de

Applications :
For waterproofing pipes with large openings Made of silicone for higher temperatures up to +250 °C upon request

Properties :
Large base ensures optimum positioning Reliable and easy installation Seals pipe and roof in a single work step Prevents rainwater back-up

Technical specifications :
1 Pipe flashing 1 cartridge of EJOPLAST joint sealant 1 EJOT® self-drilling screw set

More information on : www.ejot.de

Applications :
For waterproofing pipes on trapezoidal or sinusoidal metal roofs or fibre cement roofs Made of silicone for higher temperatures up to +250 °C upon request Note Use Bulbtite rivets for corrugated fibre-cement sheets.

Properties :
Perfect seal on roof and facade No interference of thermal elongation of pipes No fatigue fractures

Technical specifications :
1 Pipe flashing 1 Cartridge of EJOPLAST joint sealant 1 EJOT® self-drilling screw set / optional EJOT® Bulbtite set

More information on : www.ejot.de

Applications :
Sealing square pipe cross-sections of more than 1 m side length or diameter Forming expansion joints Made of silicone for higher temperatures up to +250 °C upon request

Properties :
Edge of sealing strip ≤ 25 % (accordion principle) Use up to profile height ≤ 35 mm

Technical specifications :
DSFBNG: 2 cartridges joint sealant (neutral curing silicone) DSFBNG: 5 cartridges joint sealant (neutral curing silicone) 1 EJOT® self-drilling screw kit

More information on : www.ejot.de

Applications :
Ideal for PV For up to 12 cables Note Use bulbtite rivets for corrugated fibre-cement sheets

Properties :
Black or grey EPDM

Technical specifications :
1 Pipe flashing 1 cartridge of EJOPLAST joint sealant 1 EJOT® self-drilling screw set – optional EJOT® bulbtite set

More information on : www.ejot.de

Applications :
Ideal for solar installations and PV For up to 2 cables + 1 pipe Note Use bulbtite rivets for corrugated fibre-cement sheets.

Properties :
Black or grey EPDM Silicone for high temperatures also available

Technical specifications :
1 Pipe flashing 1 cartridge of EJOPLAST joint sealant 1 EJOT® self-drilling screw set – optional EJOT® bulbtite set

More information on : www.ejot.de

Applications :
Ideal for solar installations and PV For up to 4 cables + 1 pipe Note Use bulbtite rivets for corrugated fibre-cement sheets.

Properties :
Black or grey EPDM Silicone for high temperatures also available

Technical specifications :
1 Pipe flashing 1 cartridge of EJOPLAST joint sealant 1 EJOT® self-drilling screw set / optional EJOT® bulbtite set

More information on : www.ejot.de