Tools

Applications :
To compensate for tolerances on wall and roof

Properties :
Simple clicking on the anchor between the wall and rail Tolerances can be individually compensated through combination with multiple compensation pieces Sorted by colour

Technical specifications :
Dimensions: 50 x 50 mm

More information on : www.ejot.de

Applications :
ejotherm STR plug   Special polystyrene (EPS) isolation plug To be used with ejotherm STR U 2G, ejotherm STR U for surface fixed installation ejotherm STR plug is included in the packaging of ejotherm STR H

More information on : www.ejot.de

Applications :
ejotherm STR cap MW  Specially developed mineral wool insolation cap For countersunk Installation acc. to EJOT STR principle To be used with ejotherm STR U 2G, STR U, STR H, STR H A2 and ejotherm VT 2G

More information on : www.ejot.de

Applications :
To combine with ejotherm SDK U and ejotherm NK U Hole diameter: 8.2 mm Washer diameter: 60 mm Colour: blue

More information on : www.ejot.de

Applications :
ejotherm STR cap EPS   Specially developed polystrene (EPS) isolation cap For coutnersunk Installation acc. to EJOT STR principle To be used with ejotherm STR U 2G, ejotherm STR U,ejotherm STR H and STR H A2

Properties :
Colours: White and grey

More information on : www.ejot.de

Applications :
Used in conjunction with fasteners TKR, TKE and VHT-R

Properties :
Polyamide disc washer

Technical specifications :
60mm diameter 5mm inner diameter hole

More information on : www.ejot.de

Applications :
Specifically for mineral wool lamella boards        

Properties :
Washer diameter: 140 mm The washer‘s high rigidity, allows for a equal compression across the face High bearing loads once in contact with the render        

Technical specifications :
Please note: When using additional washers VT90 and SBL 140 plus the EJOT STR principle cannot be applied.        

More information on : www.ejot.de

Applications :
Load spreading disc washer for insulation

Properties :
Material: Polyamide

Technical specifications :
To be used in conjunction with EJOT anchors 90mm Diameter

More information on : www.ejot.de

Applications :
Special compilation of accessory parts frequently used for the base rail assembly

Properties :
Set comprises: 75 nail anchors EJOT NDK 6 x 60.10 profile connectors EJOT PV 30\. 50 compensating pieces EJOT AS 3

More information on : www.ejot.de

Applications :
For surface fixed installation of ejotherm STR U 2G and ejotherm STR U: ejotherm STR bit TX30-M8 x 52 For countersunk installation of ejotherm STR H: ejotherm STR bit TX25-M8 x 31

More information on : www.ejot.de

Applications :
Specially developed tool for countersunk installation of ejotherm STR U 2G according to the EJOT STR principle Also compatible for use with ejotherm STR U und ejotherm STR H and STR H A2 For reliable and easy Installation according to the EJOT STR principle For all insulation boards

Properties :
Adjustment shaft with hex shank for easy use with standard drills Patented mechanism enables quick and easy adjustment to the required anchor length Easy conversion from ejotherm STR tool 2GS for surface fixed installation Robust design for long service life Worn parts can be changed quickly Set contains: ejotherm STR-tool 2GS, additional cutting discs, offset screw driver as well as bits for all applications

More information on : www.ejot.de

Applications :
EJOT special drill for perforated bricks For drilling anchor holes without lumps in perforated bricks (e.g. vertical cored bricks) Aggressive cutting angle for fast drilling without percussion Avoids bursting drill holes With SDS-plus adaptor Nominal drill diameter: 8 mm

More information on : www.ejot.de

Applications :
For additional anchor support in existing ETICS: Cost-effective retrofitting for ETICS allowing for additional anchors to be used Avoids the removal of the existing system, in most cases Using of the EJOT STR technology: cut through the existing render layer install the ejotherm STR U 2G / STR U with ejotherm STR tool 2G insert the STR cap to obtain an even plaster base finish by applying the final render coat

More information on : www.ejot.de

Applications :
Render miller For the pre-milling for subsequent surface fixed installation with EJOT washer anchors on damaged ETICS facades For the pre-milling of wall boards Note: To utilise the EJOT STR method for countersunk installation, use ejotherm STR-renovation miller.

More information on : www.ejot.de

Applications :
For levelling out facade tolerances For clip onto rail systems anchors For anchor diameters 6 mm, 8 mm und 10 mm

Properties :
Simply clip onto the anchor between wall and rail Lengths can be combined individually (3, 5,8,10,15 mm) Sorted by colour

Technical specifications :
Dimension: 50 x 50 mm

More information on : www.ejot.de

Applications :
Used in conjunction with the SW8R and TKR to retain insulation to cement particle boards, timber and SFS upto 1.2mm thick

Properties :
Hole diameter: 5.2 mm Washer diameter: 65 mm Isolated washer with an integral cap

More information on : www.ejot.de

Anwendungen :
Universell einsetzbarer Hartmetall mit Konusaufnahme Zum Bohren in allen Untergründen im Schlag- und Drehgang Zur Verwendung in Kombination mit EJOT drillX Bohrerverlängerung

Eigenschaften :
Hohe Standzeit auch in harten Baustoffen

Technische Daten :
Kennwerte: EJOT drill 100 Gesamtlänge: 160 mm Nutzlänge: 100 mm Bohrernenndurchmesser: 8 mm EJOT drill 150 Gesamtlänge: 210 mm Nutzlänge: 150 mm Bohrernenndurchmesser: 8 mm EJOT drill 250 Gesamtlänge: 310 mm Nutzlänge: 250 mm Bohrernenndurchmesser: 8 mm

Weitere Informationen unter: www.ejot.de

Anwendungen :
Ersatz-Konusaustreiber für EJOT drillX Bohrerverlängerungen Set besteht aus: 3 Stück Konusaustreiber

Weitere Informationen unter: www.ejot.de

Anwendungen :
Speziell konzipierte Bohrerverlängerung für den Einsatz von kurzen Hartmetallhammerbohrern (EJOT drill) mit Konusaufnahme Zum Erstellen extra tiefer Bohrlöcher Zur Aufnahme der EJOT drill Hartmetallbohrern und EJOT stepdrill Stufenbohrer

Eigenschaften :
Kosteneinsparung bei Bohrern bei der Verwendung ab einer Dübellänge von 155 mm Bessere Übertragung des Schlagimpulses vom Bohrhammer über die Bohrerverlängerung Erleichterung bei der Aufdoppelung von Wärmedämm-Verbundsystemen Die Geometrie der Bohrerverlängerung weitet die alte Putzschicht, um das Setzen des Dübels zu erleichtern

Technische Daten :
Kennwerte: Mit SDS-plus Aufnahme Arbeitslänge : EJOT drillX 200: 150 mm EJOT drillX 270: 220 mm Konusaustreiber im Lieferumfang enthalten

Weitere Informationen unter: www.ejot.de

Anwendungen :
Verstellschaft SDS-plus Alternativer Verstellschaft mit SDS-plus Aufnahme für ejotherm STR-tool 2GS

Weitere Informationen unter: www.ejot.de

Applications :
Alternative tool fitting for ejotherm STR-tool 2G

More information on : www.ejot.de

Applications :
Easy conversion from the existing ejotherm STR tool to the new version ejotherm STR tool 2G Conversion is necessary in order to install the new ejotherm STR U 2G The required modification manual is included in the kit Set contains: 1x base element, 1x adjustment shank and 1x cutting disc "long"

More information on : www.ejot.de

Applications :
To replace worn parts of the ejotherm STR tools 2G Set contains: 3 cutting discs, 3 bits T30 for the countersunk installtion of ejotherm STR U 2G and ejotherm STR U

More information on : www.ejot.de

Applications :
Spare part for ejotherm STR tool 2G

More information on : www.ejot.de