Metal anchors and chemical anchors

Applications :
For use as single fastener according to ETAG 001; Part 3 in non-cracked concrete (see ETA-15/0514) For use as a multiple fastener for non-supporting systems in cracked and non-cracked concrete and reinforced concrete hollow-slab ceilings (see ETA-16/0123) Suitable for natural stone with compact structure For fastening pipelines, ceiling brackets, ventilation ducts and timber substructures        

Technical specifications :
Min. drill hole depth: 40 mm Min. embedment depth: 35 mm Drill hole diameter d0: 6 mm        

More information on : www.ejot.de

Applications :
For use as single fastener according to ETAG 001; Part 3 in non-cracked concrete (see ETA-15/0514) For use as a multiple fastener for non-supporting systems in cracked and non-cracked concrete and reinforced concrete hollow-slab ceilings (see ETA-16/0123) Suitable for natural stone with compact structure For fastening pipelines, ceiling brackets, handrail brackets, shelves in high rack warehouses, ventilation ducts and timber substructures        

Technical specifications :
Min. drill hole depth: 40 mm Min. embedment depth: 35 mm Max. fastening height: 5 mm Drill hole diameter d0: 6 mm        

More information on : www.ejot.de

Applications :
For use as a multiple fastener of non-supporting systems in concrete Approved for concrete strengths from C20/25 to C50/60        

Properties :
Multiple fastening  High load bearing capacity in cracked and non-cracked concrete Small drill holes Fast and reliable installation        

More information on : www.ejot.de

Applications :
For use as single fastener according to ETAG 001; Part 4 in non-cracked concrete (see ETA-13/0442) For use as a multiple fastener in non-supporting systems in cracked and non-cracked concrete, e.g. suspension systems, pipelines, air ducts, sprinkler systems, cable racks, machines, supports and ceiling beams (see ETA 13/0441) Also suitable for reinforced concrete hollow floor, natural stone and brick Suitable for dry indoor areas        

Properties :
With collar, steel, galvanized zinc-plated Internal thread for metric screws and rods The suitable bolt length is 1-1.5 x nominal anchor length + component thickness The smallest required drill hole depth        

More information on : www.ejot.de