Applications :
Embedment of support profiles with steel rods for rainscreen applications
Embedment of suspended ceilings
Fastening of threaded sleeves
Note
Please note the European Technical Approval ETA-10/0305 in your planning and in the processing of the products. Further information about parameters and loads can be found in the approval under the tab "Downloads".
Properties :
Anchor with minimal embedment depth in concrete
Very short expansion part, for short installation times
Optimal expanding part due to radial expansion
Very high bending moment
Product identification through different sleeve colours
Double safety lock against torsion for secure installation
Technical specifications :
Characteristic values
Hole depth in concrete h1,1: ≥ 70 mm
Hole depth in concrete h1,1: ≥ 40 mm
Hole depth in concrete h1,2: ≥ 70 mm
Effective embedment depth in masonry hnom,2: ≥ 50 mm
Drill-hole diameter d0: 10 mm
Drive: A/F13
Length M8 threaded connection: 13 mm
Characteristic loads
Tensile load NRk,p in concrete C12/15
Temperature range 30 °C / 50 °C: 4.50 kN
Temperature range 50 °C / 80 °C: 4.00 kN
FRk Brick Mz 20-1.8, NF: 2.50 kN
FRk Solid lime sand brick KS 36, NF: 4.00 kN
FRk Solid lime sand brick KS 20, 8 DF: 4,50 kN
Transverse load VRk,s in concrete C12/15 at hnom,1 = 40 mm
Anchor with stainless steel screw A4: 9.12 kN
Transverse load VRk,s at hnom,2 = 50 mm
Anchor with stainless steel screw A4: 12.94 kN
Bending moment MRk,s at hnom,1 =40 mm
Anchor with stainless steel screw A4: 16.09 kN
Side load MRk,s at hnom,2 = 50 mm
Anchor with stainless steel screw A4: 26.62 Nm
More information on : www.ejot.de
