Applications :
Universal hammer-in anchor
For concrete, solid and perforated masonry (A, B, C)
For all insulation boards
With European Technical Approval (ETA)
Properties :
Approved for concrete, solid and perforated masonry
Upon installation, the washer face de-couples from the sleeve, ensuring a flush finish with the insulation surface
Safe and smooth installation with built-in setting control through the EJOT telescope effect
Zero thermal transmission
Minimised risk of breaking nails due to fibre-reinforced composites
Premounted expansion nail for quick installation
Technical specifications :
Anchor diameter: 8 mm
Washer diameter: 60 mm
Drill hole depth h1 ≥: 50 mm
Embedment depth hef≥: 40 mm
Point thermal transmission χ: 0.000 W/K
Use categories ETA: A, B, C
German DIBt approval: Z-21.2-1844
European Technical Approval: ETA-07/0026
Characteristic loads:
Building material class A:
Normal weight concrete C 12/15 acc. to EN 206-1: 0.6 kN
Normal weight concrete C 16/20 - C 50/60 acc. to EN 206-1: 0.9 kN
Building material class B:
Clay bricks (Mz) acc. to DIN 105: 0.9 kN
Solid lame sandstone (KS) acc. to DIN EN 106: 0.9 kN
Building material class C:
Vertically perforated clay bricks (Hlz) acc. to DIN 105: 0.6 kN
Sand-lime perforated bricks (KSL) acc. to DIN EN 106: 0.9 kN
*For calculation of design loads the national safety factors have to be included (e.g. Germany: 3). Please observe the approval.
More information on : www.ejot.de
