Applications :
Universal hammer-in anchor
Approved for all material classes (A, B, C, D, E)
For all insulation boards
For surface fixed installation
With European Technical Approval (ETA)
Properties :
Approved for concrete, solid and perforated masonry
Solid steel nail (break-proof)
Low profile washer face
Plastic injection element to reduce thermal transmission (0,001 W/K)
Can be used with an additional spreader washer
KShort embedment depth, reduced drilling
High loads for your security
Economic anchor usage
Premounted nail for quick installation
Technical specifications :
Anchor diameter: 8 mm
Washer diameter: 60 mm
Drill hole depth h1 ≥: 35 mm
Embedment depth hef≥: 25 mm
Point thermal transmission χ: 0.001 W/K
Use categories acc. to ETA: A, B, C
European Technical Approval: ETA-11/0192
Characteristic loads:
Building material class A:
Normal weight concrete C 12/15 acc. to EN 206-1: 0.9 kN
Normal weight concrete C 16/20 - C 50/60 acc. to EN 206-1: 0.9 kN
Building material class B:
Clay bricks (Mz) acc. to DIN 105: 0.9 kN
Solid lime sandstone (KS) acc. to DIN EN 106: 0.9 kN
Building material class C:
Vertically perforated clay brick (Hlz) acc. to DIN 105, bulk density ≥ 1.2 kg/dm3: 0.75 kN
Vertically perforated clay brick (Hlz) acc. to DIN 105, bulk density ≥ 0.9 kg/dm3: 0.6 kN
Sand-lime perforated (KSL) acc. to DIN EN 106: 0.9 kN
For calculation of design loads the national safety factors have to be included (e.g. Germany: 3). Please observe the approval.
More information on : www.ejot.de
