Tools

Applications :
Load spreading disc washer for insulation

Properties :
Material: Polyamide

Technical specifications :
To be used in conjunction with EJOT anchors 90mm Diameter

More information on : www.ejot.de

Applications :
Specifically for mineral wool lamella boards        

Properties :
Washer diameter: 140 mm The washer‘s high rigidity, allows for a equal compression across the face High bearing loads once in contact with the render        

Technical specifications :
Please note: When using additional washers VT90 and SBL 140 plus the EJOT STR principle cannot be applied.        

More information on : www.ejot.de

Applications :
Used in conjunction with fasteners TKR, TKE and VHT-R

Properties :
Polyamide disc washer

Technical specifications :
60mm diameter 5mm inner diameter hole

More information on : www.ejot.de

Applications :
ejotherm STR plug   Special polystyrene (EPS) isolation plug To be used with ejotherm STR U 2G, ejotherm STR U for surface fixed installation ejotherm STR plug is included in the packaging of ejotherm STR H

More information on : www.ejot.de

Applications :
Specifically matched combination washer for ejotherm STR U 2G for countersunk installation into all mineral wool insulation boards WAP-zg (type WV)   ejotherm VT 2G continues to promote the countersunk installation acc. to STR principle in all mineral wool insulation boards with a low tensil strength WAP-zg (type WV) For homogeneous surfaces and even rendering With European Technical Approval (ETA)        

Properties :
Low point thermal transmission (Chi value 0.001 W/K) Reduced anchor marks No additional tool required Permanent contact pressure Anchor locates easily in the washer with a firm "click" 100% setting control        

Technical specifications :
Washer diameter: 110 mm German DIBt approval: Z-21.2-1769 European Technical Approval: ETA-04-0023  The quantity of anchors can be found in the mineral wool approvals for washers ≥90 mm..        

More information on : www.ejot.de

Applications :
To compensate for tolerances on wall and roof

Properties :
Simple clicking on the anchor between the wall and rail Tolerances can be individually compensated through combination with multiple compensation pieces Sorted by colour

Technical specifications :
Dimensions: 50 x 50 mm

More information on : www.ejot.de

Applications :
Fastening of External Thermal Insulation Systems on problematic substrates To combine with EJOT SDF-S plus 8UB

Technical specifications :
Technical data EJOT TE 60/50 and 60/110 in combinaton with EJOT SDF-S plus 8UB Shaft length EJOT TE 60/50: 50 mm Shaft length EJOT TE 60/110: 110 mm Washer diameter: 60 mm Screw drive: TORX T30 Drill hole depth h1 ≥ : 80 mm Embedment depth hef ≥ : 70 mm Point thermal transmission χ TE 60/50: 0.002 W/K Point thermal transmission χ TE 60/110 with insulation thickness 120-150 mm: 0.000 W/K Point thermal transmission χ TE 60/110 with insulation thickness 150-240: 0.001 W/K European Technical Approval ETA-04/0064

More information on : www.ejot.de

Applications :
For fastening External Thermal Insulation Composite Systems with problematic substrates To combine with EJOT SDF-S plus 8UB Available in two lengths With European Technical Assessment For surface fixed installation Can be combined with additional washers EJOT SBL 140 plus and EJOT VT 90 Washer diameter: 60 mm Special sealing plug made of polystyrene (EPS) included in the scope of supply

Technical specifications :
Shaft length EJOT TE 60/50: 50 mm Shaft length EJOT TE 60/110: 110 mm Washer Diameter: 60 mm Screw drive: TORX T30 Drill hole depth h1: ≥ 80 mm Embedment depth hef: ≥ 70 mm Point thermal transmission Χ EJOT TE 60/50 with insulation thicknesses 60 - 180 mm: 0.002 W/K Point thermal transmission Χ EJOT TE 60/110 with insulation thicknesses 120 - 150 mm: 0.00 W/K Point thermal transmission Χ EJOT TE 60/110 with insulation thicknesses 150 - 240 mm: 0.001 W/K European Technical Assessment: ETA-04/0064

More information on : www.ejot.de

Applications :
Special step drill For penetration of existing thick renders and for non-standard applications For use in combination with EJOT drillX

Technical specifications :
Total length: 210 mm Use length: 150 mm Drill diameter: 8 mm / 19 mm

More information on : www.ejot.de

Applications :
For connecting profile rails Simply clip onto the rail elements to be connected Facilitates the precise adjustment of base rails Available length: 30 mm each and 1,150 mm

More information on : www.ejot.de

Applications :
Special compilation of accessory parts frequently used for the base rail assembly

Properties :
Set comprises: 75 nail anchors EJOT NDK 6 x 60.10 profile connectors EJOT PV 30\. 50 compensating pieces EJOT AS 3

More information on : www.ejot.de

Applications :
Used in conjunction with fasteners and anchors depending of inner diameter

Properties :
Polyamide disc washer

Technical specifications :
60mm diameter 8mm inner diameter hole

More information on : www.ejot.de

Applications :
To combine with ejotherm SDK U and ejotherm NK U Hole diameter: 8.2 mm Washer diameter: 60 mm Colour: blue

More information on : www.ejot.de

Applications :
Render miller For the pre-milling for subsequent surface fixed installation with EJOT washer anchors on damaged ETICS facades For the pre-milling of wall boards Note: To utilise the EJOT STR method for countersunk installation, use ejotherm STR-renovation miller.

More information on : www.ejot.de

Applications :
For surface fixed installation of ejotherm STR U 2G and ejotherm STR U: ejotherm STR bit TX30-M8 x 52 For countersunk installation of ejotherm STR H: ejotherm STR bit TX25-M8 x 31

More information on : www.ejot.de

Applications :
Spare part for ejotherm STR tool 2G

More information on : www.ejot.de

Applications :
To replace worn parts of the ejotherm STR tools 2G Set contains: 3 cutting discs, 3 bits T30 for the countersunk installtion of ejotherm STR U 2G and ejotherm STR U

More information on : www.ejot.de

Applications :
Specially developed tool for countersunk installation of ejotherm STR U 2G according to the EJOT STR principle Also compatible for use with ejotherm STR U und ejotherm STR H and STR H A2 For reliable and easy Installation according to the EJOT STR principle For all insulation boards

Properties :
Adjustment shaft with hex shank for easy use with standard drills Patented mechanism enables quick and easy adjustment to the required anchor length Easy conversion from ejotherm STR tool 2GS for surface fixed installation Robust design for long service life Worn parts can be changed quickly Set contains: ejotherm STR-tool 2GS, additional cutting discs, offset screw driver as well as bits for all applications

More information on : www.ejot.de

Applications :
Easy conversion from the existing ejotherm STR tool to the new version ejotherm STR tool 2G Conversion is necessary in order to install the new ejotherm STR U 2G The required modification manual is included in the kit Set contains: 1x base element, 1x adjustment shank and 1x cutting disc "long"

More information on : www.ejot.de

Applications :
For additional anchor support in existing ETICS: Cost-effective retrofitting for ETICS allowing for additional anchors to be used Avoids the removal of the existing system, in most cases Using of the EJOT STR technology: cut through the existing render layer install the ejotherm STR U 2G / STR U with ejotherm STR tool 2G insert the STR cap to obtain an even plaster base finish by applying the final render coat

More information on : www.ejot.de

Applications :
ejotherm STR cap MW  Specially developed mineral wool insolation cap For countersunk Installation acc. to EJOT STR principle To be used with ejotherm STR U 2G, STR U, STR H, STR H A2 and ejotherm VT 2G

More information on : www.ejot.de

Applications :
ejotherm STR cap EPS   Specially developed polystrene (EPS) isolation cap For coutnersunk Installation acc. to EJOT STR principle To be used with ejotherm STR U 2G, ejotherm STR U,ejotherm STR H and STR H A2

Properties :
Colours: White and grey

More information on : www.ejot.de

Applications :
Alternative tool fitting for ejotherm STR-tool 2G

More information on : www.ejot.de

Anwendungen :
Verstellschaft SDS-plus Alternativer Verstellschaft mit SDS-plus Aufnahme für ejotherm STR-tool 2GS

Weitere Informationen unter: www.ejot.de