Self-drilling Screws

Applications :
Side lap stitching of profiled steel sheet        

Properties :
Case-hardened, zinc-plated steel with innovative screw point geometry With free spin zone under screw head for side lap stitching Non-skid application Fastening without swarf Callated (20 per cartidrige) suitable for fixing with the EJOFAST® JF screwdriver        

Technical specifications :
Drill capacity tI + tII: 0.88 + 0.88 mm Head geometry: Hexagon head Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Transom fastening Direct installation into timber and PVC

Properties :
Partial Thread Case-hardened steel

Technical specifications :
Head diameter: 11.5 mm Drive: T30 Note Check pre-drilling, when installing into hard wood

More information on : www.ejot.de

Applications :
To form floating and fixed points on substructures of rear ventilated facades Fastening pre-drilled stainless steel or aluminium wall brackets to aluminium support profiles For component assemblies from 6.0–7.0 mm (component I + component II)        

Technical specifications :
Drilling capacity: 2.0 mm Drive: hexagon A/F 8 Flange head: Ø 13 mm Material: A2 stainless steel Length non-threaded part: 7.0 mm        

More information on : www.ejot.de

Anwendungen :
Verschraubung von Aluminiumprofilen auf Aluminiumunterkonstruktionen ≤ 3 mm        

Eigenschaften :
Edelstahl A2          

Technische Daten :
Bohrkapazität tI + tII: 1,0 + 3,0 mm Antrieb: Sechskant SW8 Einschraubdrehzahl: max. 1500 1/min        

Weitere Informationen unter: www.ejot.de

Applications :
Fastening aluminium profiles to aluminium substructure ≤4 mm        

Properties :
A2 stainless steel        

Technical specifications :
Drilling capacity tI + tII: 2.0 + 4.0 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Anwendungen :
Verschraubung von Aluminiumwellprofilblechen auf Holzunterkonstruktionen Verschraubung von Fassadenplatten auf Holzunterkonstruktionen        

Eigenschaften :
Edelstahl A2 Dichtscheibe aus Edelstahl Dichtscheibe unverlierbar vormontiert Gewinde nach DIN 7998        

Technische Daten :
Bohrkapazität tI + tII: 0,5 - 2,0 mm Antrieb: Innensechsrund TORX® T25 Einschraubdrehzahl: max. 1500 1/min        

Weitere Informationen unter: www.ejot.de

Applications :
Fastener for ALUCOBOND® external wall cladding according to Z-33.2-6 We recommend the tapered special bit TORX® T25W-1/4"/Cx25 for force fit in the fastener head.        

Properties :
A2 stainless steel Fastener heads in ALUCOBOND® standard and special colours available (delivery time approx. 10 work days)   Advantages Centred drilling and simultaneous fastening of the boards to the substructure No pre-drilling of the substructre        

Technical specifications :
Drilling capacity tI + tII: 1.0 + 3.0 mm Drive: Hexalobular T25 Ø drill hole centring bush: 8.0 mm        

More information on : www.ejot.de

Applications :
Fastening aluminium corrugated profile sheet to aluminium substructure ≤ 3 mm Fastening facade panels to aluminium substructure        

Properties :
A2 stainless steel        

Technical specifications :
Drilling capacity tI + tII: 1.0 + 3.0 mm Drive: Hexalobular TORX® T25        

More information on : www.ejot.de

Applications :
Fastening aluminium corrugated profile sheet to aluminium substructure ≤ 3 mm Fastening facade panels to aluminium substructure        

Properties :
A2 stainless steel        

Technical specifications :
Drill capacity tI + tII: 1.0 + 3.0 mm Drive: Hexalobular TORX® T25        

More information on : www.ejot.de

Applications :
Fastening fibre cement corrugated sheets to timber substructures Note Suitable for covering with fibre cement corrugated sheet profile 177/51 P5 and P6 to timber substructure without insulation. For the dimensioning and the use of fastening materials please note the manufacturer's instructions for use as well as the national approvals.        

Properties :
A2 stainless steel Pre-assembled FZD sealing washer A2 stainless steel washer Screw wings save additional drilling into the corrugated slabs Reduced forcing tension        

Technical specifications :
Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening facade panels to aluminium substructure ≤ 2 mm Note Please note the respective approval of the facade panel and the assembly instructions of the manufacturer.        

Properties :
A2 stainless steel Pan head        

Technical specifications :
Drilling capacity (tI pre-drilled) + tII: 1.5–2.0 mm Drive: Hexalobular T25 Head diameter: 16 mm Head height: 2 mm Length non-threaded part: 6.0 mm        

More information on : www.ejot.de

Applications :
Fastening facade panels to timber and aluminium substructure Note Please note the respective approval of the facade panel and the assembly instructions of the manufacturer.        

Properties :
A2 stainless steel Pan head        

Technical specifications :
Drilling capacity (tI pre-drilled) + tII: 1.5–2.0 mm Drive: Hexalobular T25 Head diameter: 16 mm Head height: 2 mm Length non-threaded part: 6.0 mm        

More information on : www.ejot.de

Anwendungen :
Zur Befestigung von Fassadenplatten auf Aluminiumunterkonstruktionen 1,5-3,0 mm Kombinierbar mit LT-Fest- und Gleitpunkthülsen Hinweis Bitte beachten Sie die jeweilige Zulassung der Fassadenplatte sowie die Montagevorschriften des Herstellers.        

Eigenschaften :
Edelstahl A2 Linsenkopf Vorteile Abdeckung von Langlöchern und großen Vorbohrdurchmessern Auch in RAL-Lackierung erhältlich Ästhetische Fassadengestaltung durch sehr flachen Schraubenkopf Taumelfreie Verschraubung durch Verwendung des LT-Tools        

Technische Daten :
Bohrkapazität (tI vorgelocht) tII: 1,5–30 mm Antrieb: Innensechsrund T25 Kopfdurchmesser: 16 mm Kopfhöhe: 2 mm        

Weitere Informationen unter: www.ejot.de

Applications :
Fastening timber laths to aluminium substructure ≤ 2 mm        

Properties :
A2 stainless steel Countersunk head with milling ribs        

Technical specifications :
Drilling capacity tI + tII: 2.0 mm Drive: Hexalobular TORX® T25        

More information on : www.ejot.de

Anwendungen :
Zur konstruktiven Befestigung von ALUCOBOND®-Platten auf Aluminiumunterkonstruktionen 2,0 mm        

Eigenschaften :
Edelstahl A2 Vorteile Befestiger durchbohrt ALUCOBOND-Platte und Aluminium Unterkonstruktion Gewindefreier Teil unter dem Schraubenkopf ermöglicht ein gewolltes Weiterdrehen des Schraubenkopfes nach Kopfauflage Schneidring unter dem Schraubkopf schneidet Schutzfolie auf der Fassadenplatte ein Schutzfolie kann nach erfolgter Montage von der ALUCOBOND-Platte rückstandslos entfernt werden Auch in lackierter Ausführung erhältlich          

Technische Daten :
Bohrkapazität tI + tII: 2,0 mm Antrieb Innensechsrund: T25        

Weitere Informationen unter: www.ejot.de

Applications :
Fastening profiled steel sheets to 1.5 – 5 mm steel substructure Fastening profiled aluminium sheets and sandwich panels to 1.5-5 mm steel substructure        

Technical specifications :
Drilling capacity tI + tII: 2.0 + 4.0 mm  Drive: Hexagon A/F8 Installation rotation speed: max. 1300 rpm        

More information on : www.ejot.de

Applications :
To form floating and fixed points on substructures of rear ventilated facades Fastening pre-drilled stainless steel or aluminium wall brackets to aluminium support profiles For component assemblies from 3.1–5.0 mm (component I + component II)        

Technical specifications :
Drilling capacity: 2.0 m Drive: Hexagon AF8 Flange head: Ø 13 mm Material: A4 stainless steel Length non-threaded part: 5.0 mm        

More information on : www.ejot.de

Applications :
To form floating and fixed points on aluminium substructures of rear ventilated facades Fastening pre-drilled stainless steel or aluminium wall brackets to aluminium support profiles For component assemblies from 6.0–7.0 mm (component I + component II)        

Technical specifications :
Drilling capacity: 2.0 mm Drive: Hexagon AF8 Flange head: Ø 13 mm Material: A4 stainless steel Length non-threaded part: 7.0 mm        

More information on : www.ejot.de

Applications :
Fastening aluminium profiles to aluminium substructure ≤4 mm        

Properties :
A4 stainless steel        

Technical specifications :
Drilling capacity tI + tII: 2.0 + 4.0 mm Drive: Hexagon AF8        

More information on : www.ejot.de

Applications :
Fastening window handles

Properties :
With dog point Quality grade 4.8

Technical specifications :
Head diameter: 9.0 mm Drive: Cross recess PH 2 Thread type: metric

More information on : www.ejot.de

Applications :
For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement

Properties :
Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Kopfdurchmesser: 7,5 mm Antrieb: Kreuzschlitz PH 2 Gewindetyp: ST-Gewinde

More information on : www.ejot.de

Applications :
Fixing reinforced steel up to 3.0 mm in PVC windows also with inserted spacer bars

Properties :
With long drill point for a broad application range Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: ST thread

More information on : www.ejot.de

Applications :
For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement Mounting of fittings

Properties :
Burglary-resistant (RC2) Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 T hread type: ST thread

More information on : www.ejot.de

Applications :
Fixing reinforced steel up to 3.0 mm in PVC windows with inserted spacer bars Mounting of fittings

Properties :
Roll-sorted quality for automated fastening Case-hardened steel

Technical specifications :
Head diameter: 7.5 mm Drive: cross recess PH 2 Thread type: ST thread

More information on : www.ejot.de