ETICS Anchors

Applications :
Fastening of rail-systems Hammer-in anchor for rails For fixing holding and base rails Approved for concrete, solid and perforated masonry        

Properties :
Approved for concrete, solid and perforated masonry Shortest embedment depths, minimum drill hole depths High loads for high security • Premounted nail for quick installation To compensate facade tolerances use spacers EJOT AS        

Technical specifications :
Anchor diameter: 8 mm Collar diameter:16 mm Drill hole depth h1 >: 35 mm  Embedment depth hef >: 25 mm Use categories acc. to ETA: A, B, C European Technical Approval: ETA-05/0009 Values in parentheses: anchoring in aerated concrete (use category E)        

More information on : www.ejot.de

Applications :
Screw fastener for the corrosion resistant fixing of ETICS with German DIBt approval   For Fermacell boards, cement particle boards, wooden substrates and metal Frame For a corrsion-free fastening For countersunk and surface fixed installation For homogeneous surfaces With German DIBt approval

Properties :
Fastener, consistent of a A2 stainless screw with hardened drill point, included washer and an EPS sealing plug EJOT STR principle with ejotherm STR cap for homogeneous surfaces and even rendering - quick and easy without milling dust Countersunk installation in mineral wool insulation boards WAP-zg (type WV) in combination with ejotherm VT 2G No drilling necassary Surface fixed installation with ejotherm STR plug Permanent contact pressure 100% Setting control: the countersunk installation of the washer indicates safe anchorage

Technical specifications :
Screw diameter: 6 mm Washer diameter: 60 mm Screw-in depth: 30 - 40 mm Screw drive: TORX T25 Point thermal transmission χ: countersunk installation in timber substrates: 0.001 W/K surface fixed installation in timber substrates: 0.002 W/K German DIBt approval: Z-9.1-822 Tensile strength from the substrate: Solid wood, laminated timber,laminated beams or cross laminated timber made of softwood     Minimum screw-in depth: 35 mm oder 24 mm (embedment)     Designed load Fax,90,Rd: 0.94kN OSB boards     Minimum screw-in depth: 15 mm (thread engagement)     Designed load Fax,90,Rd: 0.56kN Synthetic resin bonded chipboard     Minimum screw-in depth: 16 mm (thread engagement)     Designed load Fax,90,Rd: 0.56kN Cement particle board     Minimum embedment depth: 16 mm (thread engagement)     Designed load Fax,90,Rd: 0.56kN Detailed information about the substrates can be found in the German DIBt approval. Die The options for structural fastening can be found in the technical data sheet.

More information on : www.ejot.de

Applications :
Fastening of rail-systems Screw-in anchor for rails For fixing holding and base rails Approved for all categories of building materials        

Properties :
Approved for all categories of building materials Shortest embedment depths, minimum drill hole depths Highest loads for maximum safety Economic anchor usage Premounted screw for quick installation To compensate facade tolerances use spacers EJOT AS        

Technical specifications :
Anchor diameter: 8 mm Collar diameter:16 mm Drill hole depth h1 >: 35 mm (75 mm) Embedment depth hef >: 25 mm (65 mm) Screw drive: TORX T30 Use categories acc. to ETA: A, B, C, D German DIBt approval: Z-21.2-1769 European Technical Approval: ETA-04/0023 Values in parentheses: anchoring in aerated concrete (use category E)        

More information on : www.ejot.de