For Insulation Boards

Applications :
Universal hammer-in anchor   Approved for all material classes (A, B, C, D, E) For all insulation boards For surface fixed installation With European Technical Approval (ETA)        

Properties :
Approved for concrete, solid and perforated masonry Solid steel nail (break-proof) Low profile washer face Plastic injection element to reduce thermal transmission (0,001 W/K) Can be used with an additional spreader washer KShort embedment depth, reduced drilling High loads for your security Economic anchor usage Premounted nail for quick installation        

Technical specifications :
Anchor diameter: 8 mm Washer diameter: 60 mm Drill hole depth h1 ≥: 35 mm  Embedment depth hef≥: 25 mm Point thermal transmission χ: 0.001 W/K  Use categories acc. to ETA: A, B, C European Technical Approval: ETA-11/0192 Characteristic loads: Building material class A: Normal weight concrete C 12/15 acc. to EN 206-1: 0.9 kN Normal weight concrete C 16/20 - C 50/60 acc. to EN 206-1: 0.9 kN Building material class B: Clay bricks (Mz) acc. to DIN 105: 0.9 kN Solid lime sandstone (KS) acc. to DIN EN 106: 0.9 kN Building material class C: Vertically perforated clay brick (Hlz) acc. to DIN 105, bulk density ≥ 1.2 kg/dm3: 0.75 kN Vertically perforated clay brick (Hlz) acc. to DIN 105, bulk density ≥ 0.9 kg/dm3: 0.6 kN Sand-lime perforated (KSL) acc. to DIN EN 106: 0.9 kN For calculation of design loads the national safety factors have to be included (e.g. Germany: 3). Please observe the approval.        

More information on : www.ejot.de

Applications :
Universal screw-in anchor for countersunk and surface fixed installation in concrete and masonry   For all substrates (A, B, C, D, E) For all insulation boards For countersunk and surface fixed instalaltion For homogeneous surfaces and even rendering Up to 40% faster installation With European Technical Approval (ETA)        

Properties :
Approved for all building materials Countersunk installation - EJOT STR principle with ejotherm STR cap for homogeneous surfaces and even rendering - quick and easy without milling dust Up to 40% fastener installation Reduced thermal transmission (0.001 W/K) Surface fixed installation using ejotherm STR plug Short embedment depths, high loads for maximum safety and economic anchor usage Permanent contact pressure Premounted screw for quick installation 100% setting control: the countersunk installation of the washer indicates safe anchorage        

Technical specifications :
Anchor diameter: 8 mm Washer diameter: 60 mm Drill hole depth, countersunk installation h1 ≥: 50 mm (90 mm) Drill hole depth, surface fixed installation h2 ≥: 35 mm (75 mm) Anchorage depth hef≥: 25 mm (65 mm) Screw drive: TORX T30 Point thermal transmission χ  countersunk installation: 0,001 W/K surface fixed installation: 0,002 W/K Use categories acc. to ETA*: A, B, C, D, E German DIBt approval: Z-21.2-1769 European Technical Approval: ETA-04/0023 Values in parentheses: anchoring in aerated concrete (use category E) *Specification according to ÖNORM B 6124 for concrete, solid brick and vertical brick Characteristic loads: Building material class A: Normal weight concrete C 12/15 acc. to EN 206-1: 1.5 kN Normal weight concrete C 16/20 - C 50/60 acc. to EN 206-1: 1.5 kN Pre-cast concrete panel C16/20 - C50/60: 1.5 kN Building material class B: Clay bricks (Mz) acc. to DIN 105: 1.5 kN Solid lime sandstone (KS) acc. to DIN EN 106: 1.5 kN Solid masonry of lightweight concrete (V) acc. to DIN 18152: 0.6 kN Building material class C: Vertically perforated clay bricks (Hlz) acc. to 105: 1.2 kN Vertical coring reference bricks (Hlz) acc. to ÖNORM B 6124: 0.75 kN Sand-lime perforated (KSL) acc. to EN 106: 1.5 kN Lightweight concrete hollow blocks (HbL)acc. to DIN 18151: 0.6 kN Baustoffklasse D: Lightweight aggregate concrete (LAC): 0.9 kN Building material class E: Autoclaved aerated concrete P2 - P7: 0.75 kN For calculation of design loads the national safety factors have to be included (e.g. Germany: 3). Please observe the approval.        

More information on : www.ejot.de

Applications :
Universal hammer-in anchor   For concrete, solid and perforated masonry (A, B, C) For all insulation boards With European Technical Approval (ETA)        

Properties :
Approved for concrete, solid and perforated masonry Solid steel nail (break-proof) Plastic injection moulding to reduce thermal transmission Can be used with an additional spreader washer Short embedment depths, reduced drilling High loads for your security Economic anchor usage Premounted nail for quick installation        

Technical specifications :
Anchor diameter: 8 mm Washer diameter: 60 mm Drill hole depth h1≥: 35 mm  Embedment depth hef≥: 25 mm Point thermal transmission χ: 0.002 W/K  Use categories ETA: A, B, C European Technical Approval: ETA-05/0009 Characteristic loads: Building material class A: Normal weight concrete C 12/15 acc. to EN 206-1: 1.2 kN Normal weight concrete C 16/20 - C 50/60 acc. to EN 206-1: 1.2 kN Building material class B: Clay bricks(Mz) acc. to DIN 105: 1.5 kN Solid lame sandstone (KS) acc. to DIN EN 106: 1.5 kN Solid masonry of lightweight concrete (V) acc. to DIN 18152: 0.5 kN Building material class C: Vertically perforated clay bricks (Hlz) acc. to DIN 105: 0.9 kN Sand-lime perforated bricks (KSL) acc. to DIN EN 106: 1.5 kN Lightweight concrete hollow blocks (HbL) acc. to DIN 18151: 0.5 kN        

More information on : www.ejot.de

Applications :
Universal hammer-in anchor   For concrete, solid and perforated masonry (A, B, C) For all insulation boards With European Technical Approval (ETA)        

Properties :
Approved for concrete, solid and perforated masonry Upon installation, the washer face de-couples from the sleeve, ensuring a flush finish with the insulation surface Safe and smooth installation with built-in setting control through the EJOT telescope effect Zero thermal transmission Minimised risk of breaking nails due to fibre-reinforced composites Premounted expansion nail for quick installation        

Technical specifications :
Anchor diameter: 8 mm Washer diameter: 60 mm Drill hole depth h1 ≥: 50 mm  Embedment depth hef≥: 40 mm Point thermal transmission χ: 0.000 W/K  Use categories ETA: A, B, C German DIBt approval: Z-21.2-1844 European Technical Approval: ETA-07/0026 Characteristic loads: Building material class A: Normal weight concrete C 12/15 acc. to EN 206-1: 0.6 kN Normal weight concrete C 16/20 - C 50/60 acc. to EN 206-1: 0.9 kN Building material class B: Clay bricks (Mz) acc. to DIN 105: 0.9 kN Solid lame sandstone (KS) acc. to DIN EN 106: 0.9 kN Building material class C: Vertically perforated clay bricks (Hlz) acc. to DIN 105: 0.6 kN Sand-lime perforated bricks (KSL) acc. to DIN EN 106: 0.9 kN *For calculation of design loads the national safety factors have to be included (e.g. Germany: 3). Please observe the approval.        

More information on : www.ejot.de

Applications :
ejotherm STR plug   Special polystyrene (EPS) isolation plug To be used with ejotherm STR U 2G, ejotherm STR U for surface fixed installation ejotherm STR plug is included in the packaging of ejotherm STR H

More information on : www.ejot.de

Applications :
ejotherm STR cap MW  Specially developed mineral wool insolation cap For countersunk Installation acc. to EJOT STR principle To be used with ejotherm STR U 2G, STR U, STR H, STR H A2 and ejotherm VT 2G

More information on : www.ejot.de

Applications :
ejotherm STR cap EPS   Specially developed polystrene (EPS) isolation cap For coutnersunk Installation acc. to EJOT STR principle To be used with ejotherm STR U 2G, ejotherm STR U,ejotherm STR H and STR H A2

Properties :
Colours: White and grey

More information on : www.ejot.de

Applications :
Used in conjunction with fasteners TKR, TKE and VHT-R

Properties :
Polyamide disc washer

Technical specifications :
60mm diameter 5mm inner diameter hole

More information on : www.ejot.de

Applications :
Screw fastener for countersunk and surface fixed installation for timber and some steel substrates   For timber and steel (max. 0.75 mm) substrates For all insulation boards For countersunk and surface fixed installation

Properties :
Fastener, consistent of a galvanized steel screw, included washer and EPS sealing plug. Countersunk Installation - EJOT STR principle with ejotherm STR cap for homogeneous surfaces and even rendering - quick and easy without milling dust No drilling necessary Surface fixed Installation using ejotherm STR plug Permanent contact pressure Premounted screw for quick installation 100% setting control: the countersunk Installation of the washer indicates safe anchorage

Technical specifications :
Screw diameter: 6 mm Washer diameter: 60 mm Screw-in depth: 30 - 40 mm Screw drive: TORX T25 Point thermal transmission χ: countersunk installation in timber substrates: 0.001 W/K surface fixed installation in timber substrates: 0.002 W/K Recommended use loads: Wood fibreboards (thickness ≥ 17.0 mm): 0.25 kN Chipboards (thickness ≥ 13.0 mm): 0.25 kN Gypsum fibreboards (thickness ≥ 12.5 mm): 0.15 kN OSB plates (thickness ≥ 16.0 mm): 0.25 kN Solid wood plates (thickness ≥ 27.0 mm): 0.25 kN The recommended use loads are calculated with a safety factor of 3. They may differ according to the object.

More information on : www.ejot.de

Applications :
Specifically for mineral wool lamella boards        

Properties :
Washer diameter: 140 mm The washer‘s high rigidity, allows for a equal compression across the face High bearing loads once in contact with the render        

Technical specifications :
Please note: When using additional washers VT90 and SBL 140 plus the EJOT STR principle cannot be applied.        

More information on : www.ejot.de

Applications :
Load spreading disc washer for insulation

Properties :
Material: Polyamide

Technical specifications :
To be used in conjunction with EJOT anchors 90mm Diameter

More information on : www.ejot.de

Applications :
For surface fixed installation of ejotherm STR U 2G and ejotherm STR U: ejotherm STR bit TX30-M8 x 52 For countersunk installation of ejotherm STR H: ejotherm STR bit TX25-M8 x 31

More information on : www.ejot.de

Applications :
Specially developed tool for countersunk installation of ejotherm STR U 2G according to the EJOT STR principle Also compatible for use with ejotherm STR U und ejotherm STR H and STR H A2 For reliable and easy Installation according to the EJOT STR principle For all insulation boards

Properties :
Adjustment shaft with hex shank for easy use with standard drills Patented mechanism enables quick and easy adjustment to the required anchor length Easy conversion from ejotherm STR tool 2GS for surface fixed installation Robust design for long service life Worn parts can be changed quickly Set contains: ejotherm STR-tool 2GS, additional cutting discs, offset screw driver as well as bits for all applications

More information on : www.ejot.de

Applications :
Screw fastener for the corrosion resistant fixing of ETICS with German DIBt approval   For Fermacell boards, cement particle boards, wooden substrates and metal Frame For a corrsion-free fastening For countersunk and surface fixed installation For homogeneous surfaces With German DIBt approval

Properties :
Fastener, consistent of a A2 stainless screw with hardened drill point, included washer and an EPS sealing plug EJOT STR principle with ejotherm STR cap for homogeneous surfaces and even rendering - quick and easy without milling dust Countersunk installation in mineral wool insulation boards WAP-zg (type WV) in combination with ejotherm VT 2G No drilling necassary Surface fixed installation with ejotherm STR plug Permanent contact pressure 100% Setting control: the countersunk installation of the washer indicates safe anchorage

Technical specifications :
Screw diameter: 6 mm Washer diameter: 60 mm Screw-in depth: 30 - 40 mm Screw drive: TORX T25 Point thermal transmission χ: countersunk installation in timber substrates: 0.001 W/K surface fixed installation in timber substrates: 0.002 W/K German DIBt approval: Z-9.1-822 Tensile strength from the substrate: Solid wood, laminated timber,laminated beams or cross laminated timber made of softwood     Minimum screw-in depth: 35 mm oder 24 mm (embedment)     Designed load Fax,90,Rd: 0.94kN OSB boards     Minimum screw-in depth: 15 mm (thread engagement)     Designed load Fax,90,Rd: 0.56kN Synthetic resin bonded chipboard     Minimum screw-in depth: 16 mm (thread engagement)     Designed load Fax,90,Rd: 0.56kN Cement particle board     Minimum embedment depth: 16 mm (thread engagement)     Designed load Fax,90,Rd: 0.56kN Detailed information about the substrates can be found in the German DIBt approval. Die The options for structural fastening can be found in the technical data sheet.

More information on : www.ejot.de

Anwendungen :
Verstellschaft SDS-plus Alternativer Verstellschaft mit SDS-plus Aufnahme für ejotherm STR-tool 2GS

Weitere Informationen unter: www.ejot.de

Applications :
Specifically matched combination washer for ejotherm STR U 2G for countersunk installation into all mineral wool insulation boards WAP-zg (type WV)   ejotherm VT 2G continues to promote the countersunk installation acc. to STR principle in all mineral wool insulation boards with a low tensil strength WAP-zg (type WV) For homogeneous surfaces and even rendering With European Technical Approval (ETA)        

Properties :
Low point thermal transmission (Chi value 0.001 W/K) Reduced anchor marks No additional tool required Permanent contact pressure Anchor locates easily in the washer with a firm "click" 100% setting control        

Technical specifications :
Washer diameter: 110 mm German DIBt approval: Z-21.2-1769 European Technical Approval: ETA-04-0023  The quantity of anchors can be found in the mineral wool approvals for washers ≥90 mm..        

More information on : www.ejot.de

Applications :
Used in conjunction with the SW8R and TKR to retain insulation to cement particle boards, timber and SFS upto 1.2mm thick

Properties :
Hole diameter: 5.2 mm Washer diameter: 65 mm Isolated washer with an integral cap

More information on : www.ejot.de

Applications :
Used in conjunction with fasteners and anchors depending of inner diameter

Properties :
Polyamide disc washer

Technical specifications :
60mm diameter 8mm inner diameter hole

More information on : www.ejot.de